PC91063-12 by Align Aerospace Llc with NSN 5305-01-331-1249 - Submit a Quote

Part Number:  PC91063-12
Alternate P/N:  PC9106312
Manufacturer:  align aerospace llc
CAGE Code:  56563
FSC:  5305 Screws
INC Code:  01852

ASAP Aviation Procurement is pleased to announce that part number PC91063-12 of NSN 5305-01-331-1249 is now available and in stock. We can get you one of the fastest and most competitive quotes on this part. Part number PC91063-12 is a Screw Externally Relieved Body manufactured by Align Aerospace Llc under CAGE Code 56563. Simply fill out the Request for Quote (RFQ) form provided here to get started on your quote. In order to make sure that we get you your quote in a timely manner, please take the time to make sure that all fields are completely filled out, particularly the asterisk-marked (*) fields like Parts Needed By and Quantity (ea). 

Note : We Will Not Share Your Information To Any Third Parties.

Please fill out below form for PC91063-12

Contact Information

“*” Required Fields Are Compulsory
   * By clicking this box, I acknowledge that I have read and accept the ASAP Semiconductor Terms and Conditions and agree that all quotes and purchase orders are exclusively subject to the ASAP Semiconductor Terms and Conditions.
  • I consent to receive email communications from ASAP Semiconductor and can unsubscribe at any time.
  • ASAP Semiconductor is a wholly independent aftermarket parts distributor.
  • This website is intended for quotations based on part numbers only. Please DO NOT submit drawings, technical data, or other specifications through this portal.

Disclaimer: This is a quotation for the goods listed above. This quotation is meant as an estimate and does not reflect a final bill or invoice. All quotations are subject to change until acceptance by ASAP Semiconductor of a binding Purchase Order, and quotations may be withdrawn or revised at the sole discretion of ASAP Semiconductor. This quotation is subject to the ASAP Semiconductor Terms & Conditions available at https://www.asapsemi.com/customer-terms-and-conditions/. All United States Government and Department of Defense bids are quoted as CAGE code 6RE77 from ASAP Semiconductor’s Anaheim, California facility. Any quotation from ASAP Semiconductor without 6RE77 is void.

NSN Information for Part Number PC91063-12 with NSN 5305-01-331-1249, 5305013311249

NSNFSCNIINCLSHazmatDEMILCancelled NSN
5305-01-331-1249

Item PartTypeName:

SCREW,EXTERNALLY RELIEVED BODY

53050133112490N
CIICHCCESDPMICCriticalityENAC
UA
Part NumberISCRNVCRNCCHCCMSDSSADC
10113691596

Characteristics Data of NSN 5305-01-331-1249, 5305013311249

MRCCriteriaCharacteristic
AAJDTHREAD CLASS3A
AAJFTHREAD DIRECTIONRIGHT-HAND
ABQZINTERNAL DRIVE STYLEHEXAGON
CMLPTHREAD QUANTITY PER INCH40
AASATHREAD LENGTH0.290 INCHES MINIMUM AND 0.330 INCHES MAXIMUM
AASBFASTENER LENGTH0.900 INCHES MINIMUM AND 1.000 INCHES MAXIMUM
AAWCFIRST DIAMETER FROM HEAD0.075 INCHES MINIMUM AND 0.085 INCHES MAXIMUM
AAWHDISTANCE FROM LARGEST BEARING SURFACE OF HEAD TO END OF FIRST DIAMETER0.660 INCHES MINIMUM AND 0.710 INCHES MAXIMUM
AHYMNOMINAL THREAD DIAMETER0.112 INCHES
ASDBWIDTH ACROSS FLATS0.094 INCHES MINIMUM AND 0.095 INCHES MAXIMUM
MDCLMATERIAL DOCUMENT AND CLASSIFICATIONASTM A493 ASSN STD ALL MATERIAL RESPONSES OVERALL
SFTTSURFACE TREATMENTOXIDE OVERALL
THSDTHREAD SERIES DESIGNATORUNRC
AASKHEAD STYLEFLAT CHAMFER
AASLHEAD DIAMETER0.176 INCHES MINIMUM AND 0.183 INCHES MAXIMUM
AASUHEAD HEIGHT0.108 INCHES MINIMUM AND 0.112 INCHES MAXIMUM
CSNGEXTERNALLY RELIEVED BODY DIAMETER QUANTITY1
MATTMATERIALSTEEL COMP 302 OVERALL OR STEEL COMP 304 OVERALL OR STEEL COMP 305 OVERALL OR STEEL COMP 316 OVERALL OR STEEL COMP 384 OVERALL OR STEEL COMP XM-7 OVERALL
STDCSURFACE TREATMENT DOCUMENT AND CLASSIFICATIONMIL-C-13924 CL4 MIL SPEC SINGLE TREATMENT RESPONSE OVERALL

Semiconductor’s Certifications and Memberships



Thank You for Your Visit!

Before You Go, Take a look To Our Extensive Range of NSN Parts Catalog. We Provide High Quality NSN Parts with 24/7 Quotation Facility.

Request for Quote

We use cookies to ensure that we give you the excellent experience on our website. If you continue to use this site we will assume that you are happy with it.

bottom to top