3253 by Bei Sensors And Systems Company Inc with NSN 5905-01-051-3668 - Submit a Quote

Part Number:  3253
CAGE Code:  11534
INC Code:  37408

ASAP Aviation Procurement is pleased to announce that part number 3253 of NSN 5905-01-051-3668 is now available and in stock. We can get you one of the fastest and most competitive quotes on this part. Part number 3253 is a Resistor Variable Wire Wound Pre manufactured by Bei Sensors And Systems Company Inc under CAGE Code 11534. Simply fill out the Request for Quote (RFQ) form provided here to get started on your quote. In order to make sure that we get you your quote in a timely manner, please take the time to make sure that all fields are completely filled out, particularly the asterisk-marked (*) fields like Parts Needed By and Quantity (ea). 

Note : We Will Not Share Your Information To Any Third Parties.

Please fill out below form for 3253

Contact Information

“*” Required Fields Are Compulsory
   * By clicking this box, I acknowledge that I have read and accept the ASAP Semiconductor Terms and Conditions and agree that all quotes and purchase orders are exclusively subject to the ASAP Semiconductor Terms and Conditions.
  • I consent to receive email communications from ASAP Semiconductor and can unsubscribe at any time.
  • ASAP Semiconductor is a wholly independent aftermarket parts distributor.
  • This website is intended for quotations based on part numbers only. Please DO NOT submit drawings, technical data, or other specifications through this portal.

Disclaimer: This is a quotation for the goods listed above. This quotation is meant as an estimate and does not reflect a final bill or invoice. All quotations are subject to change until acceptance by ASAP Semiconductor of a binding Purchase Order, and quotations may be withdrawn or revised at the sole discretion of ASAP Semiconductor. This quotation is subject to the ASAP Semiconductor Terms & Conditions available at https://www.asapsemi.com/customer-terms-and-conditions/. All United States Government and Department of Defense bids are quoted as CAGE code 6RE77 from ASAP Semiconductor’s Anaheim, California facility. Any quotation from ASAP Semiconductor without 6RE77 is void.

NSN Information for Part Number 3253 with NSN 5905-01-051-3668, 5905010513668

NSNFSCNIINCLSHazmatDEMILCancelled NSN
5905-01-051-3668

Item PartTypeName:

RESISTOR,VARIABLE,WIRE WOUND,PRE

5905010513668NA
CIICHCCESDPMICCriticalityENAC
AA
Part NumberISCRNVCRNCCHCCMSDSSADC
3253R500123

Characteristics Data of NSN 5905-01-051-3668, 5905010513668

MRCCriteriaCharacteristic
AAPNSECTION QUANTITY1
AAQLBODY STYLECYLINDRICAL BUSHING MOUNTED
AARGRELIABILITY INDICATORNOT ESTABLISHED
ABPMBODY DIAMETER0.875 INCHES NOMINAL
ABWVSHAFT DIAMETER0.240 INCHES MINIMUM AND 0.250 INCHES MAXIMUM
ABXFSHAFT LENGTH0.500 INCHES NOMINAL
ADAPMOUNTING BUSHING LENGTH0.313 INCHES NOMINAL
ADAQBODY LENGTH0.750 INCHES NOMINAL
AEDXSHAFT STYLEROUND,SLOTTED
AEDZSHAFT BEARING TYPESLEEVE
AEFDACTUATOR TYPESINGLE SHAFT
AEFHEFFECTIVE ELECTRICAL ROTATION IN DEG ANGULAR ROTATION3600.0 MINIMUM AND 3610.0 MAXIMUM
AEFKMAXIMUM STARTING TORQUE1.00 INCH-OUNCES
AEFLMAXIMUM RUNNING TORQUE1.00 INCH-OUNCES
AEFMMAXIMUM STOP TORQUE50.00 INCH-OUNCES
AEFNNONTURN DEVICE LOCATIONAT 6 OCLOCK
AEFPNONTURN DEVICE RADIUS0.290 INCHES MINIMUM AND 0.310 INCHES MAXIMUM
AFJNFRAGILITY FACTORMODERATELY RUGGED
AJYNSCREW THREAD DIAMETER0.375 INCHES NOMINAL
AJYPSCREW THREAD SERIES DESIGNATORUNEF
AJYQSCREW THREAD QUANTITY PER INCH32.0
APXHTERMINAL LOCATIONRADIALLY POSITIONED OVER LESS THAN HALF THE CIRCUMFERENCE
AXGYMOUNTING METHODSTANDARD BUSHING
CBBLFEATURES PROVIDEDHUMIDITY PROOF
CBMECUBIC MEASURE0.451 CUBIC INCHES
CQCCELECTRICAL RESISTANCE PER SECTION500.0 OHMS SINGLE SECTION
CQCKROTARY ACTUATOR TRAVEL IN ANGULAR DEG3600.0 MINIMUM AND 3610.0 MAXIMUM
CQFLFUNCTION CONFORMITY TOLERANCE PER SECTION-0.25 TO 0.25 SINGLE SECTION
CQGNAMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER125.0 SINGLE SECTION
CRGDPOWER DISSIPATION RATING PER SECTION IN WATTS2.0 FREE AIR SINGLE SECTION
CRGMFUNCTION CONFORMITY PER SECTIONSINGLE SECTION INDEPENDENT LINEARITY
CRSSRESISTANCE TOLERANCE PER SECTION IN PERCENT-5.0 TO 5.0 SINGLE SECTION
CRSXACTUATOR TRAVEL CONTROL FEATURECLUTCH
CSBXFUNCTION CHARACTERISTIC PER SECTIONSINGLE SECTION LINEAR
CSDHAMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER70.0 SINGLE SECTION
TTQYTERMINAL TYPE AND QUANTITY3 TAB,SOLDER LUG

Complete Aerospace and NSN Parts Purchasing Platform

asacb

AS9120B and ISO 9001:2015

asa_member

Aviation Suppliers Association Member

certified

FAA AC 0056B Accredited

supplier

AS 6081:2012 Certification

association

ESD S20.20-2014 Certification

Semiconductor’s Certifications and Memberships



Thank You for Your Visit!

Before You Go, Take a look To Our Extensive Range of NSN Parts Catalog. We Provide High Quality NSN Parts with 24/7 Quotation Facility.

Request for Quote

We use cookies to ensure that we give you the excellent experience on our website. If you continue to use this site we will assume that you are happy with it.

bottom to top