37130 by Compair Kellogg with NSN 3120-00-994-8889 - Submit a Quote

Part Number:  37130
Manufacturer:  compair kellogg
Item Name :  bearing half sleeve
CAGE Code:  53239
FSG:  31 Bearings
INC Code:  22210

ASAP Aviation Procurement is pleased to announce that part number 37130 of NSN 3120-00-994-8889 is now available and in stock. We can get you one of the fastest and most competitive quotes on this part. Part number 37130 is a Bearing Half Sleeve manufactured by Compair Kellogg under CAGE Code 53239. Simply fill out the Request for Quote (RFQ) form provided here to get started on your quote. In order to make sure that we get you your quote in a timely manner, please take the time to make sure that all fields are completely filled out, particularly the asterisk-marked (*) fields like Parts Needed By and Quantity (ea). 

Note : We Will Not Share Your Information To Any Third Parties.

Please fill out below form for 37130

Contact Information

“*” Required Fields Are Compulsory
   * By clicking this box, I acknowledge that I have read and accept the ASAP Semiconductor Terms and Conditions and agree that all quotes and purchase orders are exclusively subject to the ASAP Semiconductor Terms and Conditions.
  • I consent to receive email communications from ASAP Semiconductor and can unsubscribe at any time.
  • ASAP Semiconductor is a wholly independent aftermarket parts distributor.
  • This website is intended for quotations based on part numbers only. Please DO NOT submit drawings, technical data, or other specifications through this portal.
Generate New Image

Type the code from the image

Disclaimer: This is a quotation for the goods listed above. This quotation is meant as an estimate and does not reflect a final bill or invoice. All quotations are subject to change until acceptance by ASAP Semiconductor of a binding Purchase Order, and quotations may be withdrawn or revised at the sole discretion of ASAP Semiconductor. This quotation is subject to the ASAP Semiconductor Terms & Conditions available at https://www.asapsemi.com/customer-terms-and-conditions/. All United States Government and Department of Defense bids are quoted as CAGE code 6RE77 from ASAP Semiconductor’s Anaheim, California facility. Any quotation from ASAP Semiconductor without 6RE77 is void.

NSN Information for Part Number 37130 with NSN 3120-00-994-8889, 3120009948889

NSNFSCNIINCLSHazmatDEMILCancelled NSN
3120-00-994-8889

Item PartTypeName:

BEARING HALF,SLEEVE

31200099488890N
CIICHCCESDPMICCriticalityENAC
UU
Part NumberISCRNVCRNCCHCCMSDSSADC
37130225

Characteristics Data of NSN 3120-00-994-8889, 3120009948889

MRCCriteriaCharacteristic
AAUBHOLE DIAMETER0.1875 INCHES NOMINAL FIRST
ABHPOVERALL LENGTH1.2870 INCHES MINIMUM AND 1.2970 INCHES MAXIMUM
ADARBODY OUTSIDE DIAMETER2.3135 INCHES MINIMUM AND 2.3155 INCHES MAXIMUM
ADASBODY INSIDE DIAMETER2.1887 INCHES MINIMUM AND 2.1913 INCHES MAXIMUM
ADZGLUBRICATION MATERIALLUBRICATING OIL
AGKDDISTANCE FROM CENTERLINE OF OPENING TO LEFT END OF BEARING0.6360 INCHES MINIMUM FIRST AND 0.6560 INCHES MAXIMUM FIRST
AGKHLUBRICANT ACCOMMODATION STYLEGROOVED CIRCULAR
AGKTLOCKING LUG HEIGHT0.0450 INCHES MINIMUM AND 0.0550 INCHES MAXIMUM
AGKULOCKING LUG LENGTH0.2188 INCHES NOMINAL
AGKVLOCKING LUG WIDTH0.1750 INCHES MINIMUM AND 0.1800 INCHES MAXIMUM
BZLXCORNER SHAPESQUARE ALL CORNERS
CTJMANTIROTATION/LUBRICATION TYPE AND QUANTITY1 HOLE
CTMQSURFACE GROOVE LOCATION AND QUANTITY1 INTERNAL
CTRQDISTANCE FROM LUG END TO END OF BEARING0.0875 INCHES MINIMUM AND 0.0900 INCHES MAXIMUM
MATTMATERIALSTEEL OUTER LAYER
MATTMATERIALTIN ALLOY INNER LAYER
SFTTSURFACE TREATMENTTIN LEFT END SURFACE OF BODY
SFTTSURFACE TREATMENTTIN OUTSIDE DIAMETER SURFACE OF BODY
SFTTSURFACE TREATMENTTIN RIGHT END SURFACE OF BODY
STYLSTYLE DESIGNATORHALF SLEEVE,PLAIN,NO OUTSIDE FLANGES

Semiconductor’s Certifications and Memberships



Thank You for Your Visit!

Before You Go, Take a look To Our Extensive Range of NSN Parts Catalog. We Provide High Quality NSN Parts with 24/7 Quotation Facility.

Request for Quote

We use cookies to ensure that we give you the excellent experience on our website. If you continue to use this site we will assume that you are happy with it.

bottom to top