LO1540 by Dla Land And Maritime with NSN 5305-01-369-8885 - Submit a Quote

Part Number:  LO1540
Manufacturer:  dla land and maritime
CAGE Code:  16236
FSC:  5305 Screws
INC Code:  01852

ASAP Aviation Procurement is pleased to announce that part number LO1540 of NSN 5305-01-369-8885 is now available and in stock. We can get you one of the fastest and most competitive quotes on this part. Part number LO1540 is a Screw Externally Relieved Body manufactured by Dla Land And Maritime under CAGE Code 16236. Simply fill out the Request for Quote (RFQ) form provided here to get started on your quote. In order to make sure that we get you your quote in a timely manner, please take the time to make sure that all fields are completely filled out, particularly the asterisk-marked (*) fields like Parts Needed By and Quantity (ea). 

Note : We Will Not Share Your Information To Any Third Parties.

Please fill out below form for LO1540

Contact Information

“*” Required Fields Are Compulsory
   * By clicking this box, I acknowledge that I have read and accept the ASAP Semiconductor Terms and Conditions and agree that all quotes and purchase orders are exclusively subject to the ASAP Semiconductor Terms and Conditions.
  • I consent to receive email communications from ASAP Semiconductor and can unsubscribe at any time.
  • ASAP Semiconductor is a wholly independent aftermarket parts distributor.
  • This website is intended for quotations based on part numbers only. Please DO NOT submit drawings, technical data, or other specifications through this portal.

Disclaimer: This is a quotation for the goods listed above. This quotation is meant as an estimate and does not reflect a final bill or invoice. All quotations are subject to change until acceptance by ASAP Semiconductor of a binding Purchase Order, and quotations may be withdrawn or revised at the sole discretion of ASAP Semiconductor. This quotation is subject to the ASAP Semiconductor Terms & Conditions available at https://www.asapsemi.com/customer-terms-and-conditions/. All United States Government and Department of Defense bids are quoted as CAGE code 6RE77 from ASAP Semiconductor’s Anaheim, California facility. Any quotation from ASAP Semiconductor without 6RE77 is void.

NSN Information for Part Number LO1540 with NSN 5305-01-369-8885, 5305013698885

NSNFSCNIINCLSHazmatDEMILCancelled NSN
5305-01-369-8885

Item PartTypeName:

SCREW,EXTERNALLY RELIEVED BODY

53050136988850N
CIICHCCESDPMICCriticalityENAC
UA
Part NumberISCRNVCRNCCHCCMSDSSADC
LL-HX8-3382595

Characteristics Data of NSN 5305-01-369-8885, 5305013698885

MRCCriteriaCharacteristic
AASLHEAD DIAMETER0.557 INCHES MINIMUM AND 0.567 INCHES MAXIMUM
CMLPTHREAD QUANTITY PER INCH20
SFTTSURFACE TREATMENTPASSIVATE OVERALL
AAJFTHREAD DIRECTIONRIGHT-HAND
AASUHEAD HEIGHT0.235 INCHES MINIMUM AND 0.265 INCHES MAXIMUM
THSDTHREAD SERIES DESIGNATORUNC
AAJDTHREAD CLASS2A
AASATHREAD LENGTH0.360 INCHES MINIMUM AND 0.390 INCHES MAXIMUM
AASKHEAD STYLEKNURLED NO. 4
AAWHDISTANCE FROM LARGEST BEARING SURFACE OF HEAD TO END OF FIRST DIAMETER1.500 INCHES NOMINAL
ABQJPOINT STYLECONE
ABQZINTERNAL DRIVE STYLESLOT
AHYMNOMINAL THREAD DIAMETER0.250 INCHES
CSNGEXTERNALLY RELIEVED BODY DIAMETER QUANTITY1
MDCLMATERIAL DOCUMENT AND CLASSIFICATIONASTM A582 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
SPCLSPECIAL TEST FEATURESSPECIAL QUALITY CONTROL TESTING
STDCSURFACE TREATMENT DOCUMENT AND CLASSIFICATIONMIL-F-14072 MIL SPEC SINGLE TREATMENT RESPONSE OVERALL
TESTTEST DATA DOCUMENT81349-MIL-P-23199 SPECIFICATION INCLUDES ENGINEERING TYPE BULLETINS,BROCHURES,ETC.,THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT EXCLUDES COMMERCIAL CATALOGS,INDUSTRY DIRECTORIES,AND SIMILAR TRADE PUBLICATIONS,REFLECTI
ZZZWDEPARTURE FROM CITED DOCUMENTAS MODOIED BY MATERIAL AND LOCKING FEATURE AS APPLICABLE)
ZZZYREFERENCE NUMBER DIFFERENTIATING CHARACTERISTICSAS DIFFERENTIATED BY MATERIAL WHICH MUST CONFORM TO SHIPS PARTS CONROL CENTER SPECIAL QUALITY CONTROL PROVISIONS
AASBFASTENER LENGTH1.860 INCHES MINIMUM AND 1.890 INCHES MAXIMUM
AAWCFIRST DIAMETER FROM HEAD0.170 INCHES MINIMUM AND 0.180 INCHES MAXIMUM
CRTLCRITICALITY CODE JUSTIFICATIONZZZY
FEATSPECIAL FEATURESITEM MUST COMPLY WITH REQUIREMENTS OF DEFENSE SUPPLY CENTER COLUMBUS PRODUCTION STANDARD NO. LO1540
MATTMATERIALSTEEL COMP 303 OVERALL

Semiconductor’s Certifications and Memberships



Thank You for Your Visit!

Before You Go, Take a look To Our Extensive Range of NSN Parts Catalog. We Provide High Quality NSN Parts with 24/7 Quotation Facility.

Request for Quote

We use cookies to ensure that we give you the excellent experience on our website. If you continue to use this site we will assume that you are happy with it.

bottom to top