DMS 84013B by Dla Land And Maritime with NSN 5905-00-917-3463 - Submit a Quote

Part Number:  DMS 84013B
Manufacturer:  dla land and maritime
CAGE Code:  16236
INC Code:  37406

ASAP Aviation Procurement is pleased to announce that part number DMS 84013B of NSN 5905-00-917-3463 is now available and in stock. We can get you one of the fastest and most competitive quotes on this part. Part number DMS 84013B is a Resistor Variable Wire Wound Non manufactured by Dla Land And Maritime under CAGE Code 16236. Simply fill out the Request for Quote (RFQ) form provided here to get started on your quote. In order to make sure that we get you your quote in a timely manner, please take the time to make sure that all fields are completely filled out, particularly the asterisk-marked (*) fields like Parts Needed By and Quantity (ea). 

Note : We Will Not Share Your Information To Any Third Parties.

Please fill out below form for DMS 84013B

Contact Information

“*” Required Fields Are Compulsory
   * By clicking this box, I acknowledge that I have read and accept the ASAP Semiconductor Terms and Conditions and agree that all quotes and purchase orders are exclusively subject to the ASAP Semiconductor Terms and Conditions.
  • I consent to receive email communications from ASAP Semiconductor and can unsubscribe at any time.
  • ASAP Semiconductor is a wholly independent aftermarket parts distributor.
  • This website is intended for quotations based on part numbers only. Please DO NOT submit drawings, technical data, or other specifications through this portal.

Disclaimer: This is a quotation for the goods listed above. This quotation is meant as an estimate and does not reflect a final bill or invoice. All quotations are subject to change until acceptance by ASAP Semiconductor of a binding Purchase Order, and quotations may be withdrawn or revised at the sole discretion of ASAP Semiconductor. This quotation is subject to the ASAP Semiconductor Terms & Conditions available at https://www.asapsemi.com/customer-terms-and-conditions/. All United States Government and Department of Defense bids are quoted as CAGE code 6RE77 from ASAP Semiconductor’s Anaheim, California facility. Any quotation from ASAP Semiconductor without 6RE77 is void.

NSN Information for Part Number DMS 84013B with NSN 5905-00-917-3463, 5905009173463

NSNFSCNIINCLSHazmatDEMILCancelled NSN
5905-00-917-3463

Item PartTypeName:

RESISTOR,VARIABLE,WIRE WOUND,NON

59050091734630N
CIICHCCESDPMICCriticalityENAC
UU
Part NumberISCRNVCRNCCHCCMSDSSADC
DMS 84013B295

Characteristics Data of NSN 5905-00-917-3463, 5905009173463

MRCCriteriaCharacteristic
AAPNSECTION QUANTITY1
AAQLBODY STYLERECTANGULAR W/MOUNTING HOLES/SLOTS
AARGRELIABILITY INDICATORNOT ESTABLISHED
ABHPOVERALL LENGTH1.280 INCHES MINIMUM AND 1.344 INCHES MAXIMUM
ABJTTERMINAL LENGTH11.500 INCHES MINIMUM
ABKWOVERALL HEIGHT0.312 INCHES MINIMUM AND 0.344 INCHES MAXIMUM
ABMKOVERALL WIDTH0.234 INCHES MINIMUM AND 0.266 INCHES MAXIMUM
ABTBMOUNTING HOLE DIAMETER0.087 INCHES MINIMUM
ABWVSHAFT DIAMETER0.109 INCHES MINIMUM AND 0.141 INCHES MAXIMUM
ABXFSHAFT LENGTH0.046 INCHES MINIMUM AND 0.078 INCHES MAXIMUM
ADAQBODY LENGTH1.234 INCHES MINIMUM AND 1.266 INCHES MAXIMUM
ADATBODY WIDTH0.234 INCHES MINIMUM AND 0.266 INCHES MAXIMUM
ADAUBODY HEIGHT0.312 INCHES MINIMUM AND 0.344 INCHES MAXIMUM
AEDXSHAFT STYLEROUND,SLOTTED
AEFDACTUATOR TYPESINGLE SHAFT
AEFHEFFECTIVE ELECTRICAL ROTATION IN DEG ANGULAR ROTATION9000.0 NOMINAL
AEFKMAXIMUM STARTING TORQUE5.00 INCH-OUNCES
AGTPLATERAL DISTANCE BETWEEN MOUNTING HOLE CENTERS0.995 INCHES MINIMUM AND 1.005 INCHES MAXIMUM
AKPVMOUNTING FACILITY QUANTITY2
APXHTERMINAL LOCATIONREAR END
AXGYMOUNTING METHODUNTHREADED HOLE
CQCCELECTRICAL RESISTANCE PER SECTION20.000 KILOHMS SINGLE SECTION
CQCKROTARY ACTUATOR TRAVEL IN ANGULAR DEG9000.0 NOMINAL
CQGNAMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER200.0 SINGLE SECTION
CRFJTEMP COEFFICIENT OF RESISTANCE PER SECTION IN PPM PER DEG CELSIUS-50.0 TO 50.0 SINGLE SECTION
CRGDPOWER DISSIPATION RATING PER SECTION IN WATTS5.0 FREE AIR SINGLE SECTION
CRSSRESISTANCE TOLERANCE PER SECTION IN PERCENT-5.0 TO 5.0 SINGLE SECTION
CRSXACTUATOR TRAVEL CONTROL FEATURECLUTCH
CSDHAMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER25.0 SINGLE SECTION
TTQYTERMINAL TYPE AND QUANTITY3 WIRE LEAD

Semiconductor’s Certifications and Memberships



Thank You for Your Visit!

Before You Go, Take a look To Our Extensive Range of NSN Parts Catalog. We Provide High Quality NSN Parts with 24/7 Quotation Facility.

Request for Quote

We use cookies to ensure that we give you the excellent experience on our website. If you continue to use this site we will assume that you are happy with it.

bottom to top