1C03234GGG0410AAA by Eaton Hydraulics Llc with NSN 4720-01-460-2862 - Submit a Quote

Part Number:  1C03234GGG0410AAA
Manufacturer:  eaton hydraulics llc
CAGE Code:  45X75
INC Code:  20311

ASAP Aviation Procurement is pleased to announce that part number 1C03234GGG0410AAA of NSN 4720-01-460-2862 is now available and in stock. We can get you one of the fastest and most competitive quotes on this part. Part number 1C03234GGG0410AAA is a Hose Assembly Nonmetallic manufactured by Eaton Hydraulics Llc under CAGE Code 45X75. Simply fill out the Request for Quote (RFQ) form provided here to get started on your quote. In order to make sure that we get you your quote in a timely manner, please take the time to make sure that all fields are completely filled out, particularly the asterisk-marked (*) fields like Parts Needed By and Quantity (ea). 

Note : We Will Not Share Your Information To Any Third Parties.

Please fill out below form for 1C03234GGG0410AAA

Contact Information

“*” Required Fields Are Compulsory
   * By clicking this box, I acknowledge that I have read and accept the ASAP Semiconductor Terms and Conditions and agree that all quotes and purchase orders are exclusively subject to the ASAP Semiconductor Terms and Conditions.
  • I consent to receive email communications from ASAP Semiconductor and can unsubscribe at any time.
  • ASAP Semiconductor is a wholly independent aftermarket parts distributor.
  • This website is intended for quotations based on part numbers only. Please DO NOT submit drawings, technical data, or other specifications through this portal.
Generate New Image

Type the code from the image

Disclaimer: This is a quotation for the goods listed above. This quotation is meant as an estimate and does not reflect a final bill or invoice. All quotations are subject to change until acceptance by ASAP Semiconductor of a binding Purchase Order, and quotations may be withdrawn or revised at the sole discretion of ASAP Semiconductor. This quotation is subject to the ASAP Semiconductor Terms & Conditions available at https://www.asapsemi.com/customer-terms-and-conditions/. All United States Government and Department of Defense bids are quoted as CAGE code 6RE77 from ASAP Semiconductor’s Anaheim, California facility. Any quotation from ASAP Semiconductor without 6RE77 is void.

NSN Information for Part Number 1C03234GGG0410AAA with NSN 4720-01-460-2862, 4720014602862

NSNFSCNIINCLSHazmatDEMILCancelled NSN
4720-01-460-2862

Item PartTypeName:

HOSE ASSEMBLY,NONMETALLIC

47200146028620N
CIICHCCESDPMICCriticalityENAC
UA0
Part NumberISCRNVCRNCCHCCMSDSSADC
1C03234GGG0410AAA523

Characteristics Data of NSN 4720-01-460-2862, 4720014602862

MRCCriteriaCharacteristic
AAGRCROSS-SECTIONAL SHAPE STYLEROUND"
AAJDTHREAD CLASS2B 1ST END"
AAJDTHREAD CLASS2B 2ND END"
AAJFTHREAD DIRECTIONRIGHT-HAND 1ST END"
AAJFTHREAD DIRECTIONRIGHT-HAND 2ND END"
AARXINSIDE DIAMETER0.380 INCHES NOMINAL"
ABJHTEMP RATING-50.0 DEG FAHRENHEIT AND 212.0 DEG FAHRENHEIT SINGLE RESPONSE"
ABKVOUTSIDE DIAMETER0.670 INCHES NOMINAL"
ACKHMINIMUM INSIDE BENDING RADIUS2.500 INCHES"
AHNCCONNECTION STYLESWIVEL NUT, GASKET SEAL 1ST END"
AHNCCONNECTION STYLESWIVEL NUT, GASKET SEAL 2ND END"
AKUUEND CONNECTION DESIGNELBOW 2ND END"
AKUUEND CONNECTION DESIGNSTRAIGHT 1ST END"
AWLSCONNECTION TYPETHREADED INTERNAL TUBE 1ST END"
AWLSCONNECTION TYPETHREADED INTERNAL TUBE 2ND END"
CMLPTHREAD QUANTITY PER INCH16 1ST END"
CMLPTHREAD QUANTITY PER INCH16 2ND END"
CQBDBURST TEST PRESSURE12000.0 POUNDS PER SQUARE INCH"
CQCSLAYER COMPOSITION AND LOCATION1ST LAYER BRAIDED WIRE AND OUTER LAYER BRAIDED POLYESTER CORD"
CQGMMAXIMUM OPERATING PRESSURE3000.0 POUNDS PER SQUARE INCH"
CQJXNOMINAL THREAD SIZE0.688 INCHES 1ST END"
CQJXNOMINAL THREAD SIZE0.688 INCHES 2ND END"
CRFYFLOW ANGLE90.0 DEGREES 2ND END"
CRWLINSIDE SURFACE CONDITIONSMOOTH"
CRXXMEASURING METHOD AND LENGTH41.000 INCHES NOMINAL OVERALL"
MEDAMEDIA FOR WHICH DESIGNEDHYDRAULIC FLUID AND AIR AND GAS AND FUEL/OIL, HYDROCARBON AND OIL, LUBRICATING, DIESTER BASE SINGLE RESPONSE"
THSDTHREAD SERIES DESIGNATORUNF 1ST END"
THSDTHREAD SERIES DESIGNATORUNF 2ND END"
AAGRCROSS-SECTIONAL SHAPE STYLEROUND"
AAJDTHREAD CLASS2B 1ST END"
AAJDTHREAD CLASS2B 2ND END"
AAJFTHREAD DIRECTIONRIGHT-HAND 1ST END"
AAJFTHREAD DIRECTIONRIGHT-HAND 2ND END"
AARXINSIDE DIAMETER0.380 INCHES NOMINAL"
ABJHTEMP RATING-50.0 DEG FAHRENHEIT AND 212.0 DEG FAHRENHEIT SINGLE RESPONSE"
ABKVOUTSIDE DIAMETER0.670 INCHES NOMINAL"
ACKHMINIMUM INSIDE BENDING RADIUS2.500 INCHES"
AHNCCONNECTION STYLESWIVEL NUT, GASKET SEAL 1ST END"
AHNCCONNECTION STYLESWIVEL NUT, GASKET SEAL 2ND END"
AKUUEND CONNECTION DESIGNELBOW 2ND END"
AKUUEND CONNECTION DESIGNSTRAIGHT 1ST END"
AWLSCONNECTION TYPETHREADED INTERNAL TUBE 1ST END"
AWLSCONNECTION TYPETHREADED INTERNAL TUBE 2ND END"
CMLPTHREAD QUANTITY PER INCH16 1ST END"
CMLPTHREAD QUANTITY PER INCH16 2ND END"
CQBDBURST TEST PRESSURE12000.0 POUNDS PER SQUARE INCH"
CQCSLAYER COMPOSITION AND LOCATION1ST LAYER BRAIDED WIRE AND OUTER LAYER BRAIDED POLYESTER CORD"
CQGMMAXIMUM OPERATING PRESSURE3000.0 POUNDS PER SQUARE INCH"
CQJXNOMINAL THREAD SIZE0.688 INCHES 1ST END"
CQJXNOMINAL THREAD SIZE0.688 INCHES 2ND END"
CRFYFLOW ANGLE90.0 DEGREES 2ND END"
CRWLINSIDE SURFACE CONDITIONSMOOTH"
CRXXMEASURING METHOD AND LENGTH41.000 INCHES NOMINAL OVERALL"
MEDAMEDIA FOR WHICH DESIGNEDHYDRAULIC FLUID AND AIR AND GAS AND FUEL/OIL, HYDROCARBON AND OIL, LUBRICATING, DIESTER BASE SINGLE RESPONSE"
THSDTHREAD SERIES DESIGNATORUNF 1ST END"
THSDTHREAD SERIES DESIGNATORUNF 2ND END"

Semiconductor’s Certifications and Memberships



Thank You for Your Visit!

Before You Go, Take a look To Our Extensive Range of NSN Parts Catalog. We Provide High Quality NSN Parts with 24/7 Quotation Facility.

Request for Quote

We use cookies to ensure that we give you the excellent experience on our website. If you continue to use this site we will assume that you are happy with it.

bottom to top