18030-30 by Electra Motors Operation Power with NSN 3040-00-116-5182 - Submit a Quote

Part Number:  18030-30
Alternate P/N:  1803030
Item Name :  worm shaft
CAGE Code:  95779
INC Code:  18249

ASAP Aviation Procurement is pleased to announce that part number 18030-30 of NSN 3040-00-116-5182 is now available and in stock. We can get you one of the fastest and most competitive quotes on this part. Part number 18030-30 is a Worm Shaft manufactured by Electra Motors Operation Power under CAGE Code 95779. Simply fill out the Request for Quote (RFQ) form provided here to get started on your quote. In order to make sure that we get you your quote in a timely manner, please take the time to make sure that all fields are completely filled out, particularly the asterisk-marked (*) fields like Parts Needed By and Quantity (ea). 

Note : We Will Not Share Your Information To Any Third Parties.

Please fill out below form for 18030-30

Contact Information

“*” Required Fields Are Compulsory
   * By clicking this box, I acknowledge that I have read and accept the ASAP Semiconductor Terms and Conditions and agree that all quotes and purchase orders are exclusively subject to the ASAP Semiconductor Terms and Conditions.
  • I consent to receive email communications from ASAP Semiconductor and can unsubscribe at any time.
  • ASAP Semiconductor is a wholly independent aftermarket parts distributor.
  • This website is intended for quotations based on part numbers only. Please DO NOT submit drawings, technical data, or other specifications through this portal.
Verify you’re human

Disclaimer: This is a quotation for the goods listed above. This quotation is meant as an estimate and does not reflect a final bill or invoice. All quotations are subject to change until acceptance by ASAP Semiconductor of a binding Purchase Order, and quotations may be withdrawn or revised at the sole discretion of ASAP Semiconductor. This quotation is subject to the ASAP Semiconductor Terms & Conditions available at https://www.asapsemi.com/customer-terms-and-conditions/. All United States Government and Department of Defense bids are quoted as CAGE code 6RE77 from ASAP Semiconductor’s Anaheim, California facility. Any quotation from ASAP Semiconductor without 6RE77 is void.

NSN Information for Part Number 18030-30 with NSN 3040-00-116-5182, 3040001165182

NSNFSCNIINCLSHazmatDEMILCancelled NSN
3040-00-116-5182

Item PartTypeName:

WORM SHAFT

30400011651820N
CIICHCCESDPMICCriticalityENAC
UU
Part NumberISCRNVCRNCCHCCMSDSSADC
18030-30C93

Characteristics Data of NSN 3040-00-116-5182, 3040001165182

MRCCriteriaCharacteristic
AAHNEND SIMILARITYIDENTICAL
ABHPOVERALL LENGTH11.594 INCHES MINIMUM AND 11.656 INCHES MAXIMUM
BYFRTEETH HARDNESS RATING60.0 ROCKWELL C MINIMUM AND 62.0 ROCKWELL C MAXIMUM
CFFBWORM THREAD QUANTITY1
CFFCWORM THREAD LEAD0.8378 INCHES NOMINAL
CFFDWORM THREAD DIRECTIONRIGHT-HAND
CFFFWORM PRESSURE ANGLE IN DEG25.000
CFFGWORM HELIX ANGLE7 DEG 36 MIN
CFFKWORM OUTSIDE DIAMETER2.533 INCHES NOMINAL
CFFLWORM PITCH DIAMETER2.000 INCHES NOMINAL
CFFMSHAFT HARDNESS RATING60.0 ROCKWELL C MINIMUM AND 62.0 ROCKWELL C MAXIMUM
CFFNWORM THREAD SECTION LENGTH5.500 INCHES NOMINAL
CFFPWORM BODY LENGTH7.601 INCHES NOMINAL
CFFQWORM BODY TAPERED BEARING SURFACE ENDNOT PROVIDED
CFFWSHAFT LOCATIONBOTH ENDS OF WORM
CFFXSTRAIGHT UNTHREADED LENGTH0.531 INCHES NOMINAL SECOND END,SECOND PORTION
CFFXSTRAIGHT UNTHREADED LENGTH0.933 INCHES MINIMUM SECOND END,FIRST PORTION
CFFXSTRAIGHT UNTHREADED LENGTH0.938 INCHES MAXIMUM SECOND END,FIRST PORTION
CFFXSTRAIGHT UNTHREADED LENGTH1.211 INCHES MINIMUM FIRST END,FIRST PORTION
CFFXSTRAIGHT UNTHREADED LENGTH1.273 INCHES MAXIMUM FIRST END,FIRST PORTION
CFFYSTRAIGHT UNTHREADED SECTION DIAMETER1.564 INCHES MINIMUM SECOND END,SECOND PORTION
CFFYSTRAIGHT UNTHREADED SECTION DIAMETER1.565 INCHES MAXIMUM SECOND END,SECOND PORTION
CFFYSTRAIGHT UNTHREADED SECTION DIAMETER1.626 INCHES MINIMUM FIRST END,FIRST PORTION
CFFYSTRAIGHT UNTHREADED SECTION DIAMETER1.626 INCHES MINIMUM SECOND END,FIRST PORTION
CFFYSTRAIGHT UNTHREADED SECTION DIAMETER1.627 INCHES MAXIMUM FIRST END,FIRST PORTION
CFFYSTRAIGHT UNTHREADED SECTION DIAMETER1.627 INCHES MAXIMUM SECOND END,FIRST PORTION
CFGJINVOLUTE SPLINE QUANTITY28 SECOND END,THIRD PORTION
CFGKINVOLUTE SPLINE PRESSURE ANGLE IN DEG30.0 SECOND END,THIRD PORTION
CFGLINVOLUTE SPLINE PITCH DIAMETER1.4000 INCHES NOMINAL SECOND END,THIRD PORTION
CFGMINVOLUTE SPLINE LENGTH0.844 INCHES NOMINAL SECOND END,THIRD PORTION
MATTMATERIALSTEEL COMP 8620
MDCLMATERIAL DOCUMENT AND CLASSIFICATIONFED STD 66,AISI/SAE 8620 FED STD SINGLE MATERIAL RESPONSE

Semiconductor’s Certifications and Memberships



Thank You for Your Visit!

Before You Go, Take a look To Our Extensive Range of NSN Parts Catalog. We Provide High Quality NSN Parts with 24/7 Quotation Facility.

Request for Quote

We use cookies to ensure that we give you the excellent experience on our website. If you continue to use this site we will assume that you are happy with it.

bottom to top