13213910-01 by General Dynamics Information Systems with NSN 5999-01-334-2837 - Submit a Quote

Part Number:  13213910-01
Alternate P/N:  1321391001
CAGE Code:  27963
INC Code:  20281

ASAP Aviation Procurement is pleased to announce that part number 13213910-01 of NSN 5999-01-334-2837 is now available and in stock. We can get you one of the fastest and most competitive quotes on this part. Part number 13213910-01 is a Shielding Gasket Electronic manufactured by General Dynamics Information Systems under CAGE Code 27963. Simply fill out the Request for Quote (RFQ) form provided here to get started on your quote. In order to make sure that we get you your quote in a timely manner, please take the time to make sure that all fields are completely filled out, particularly the asterisk-marked (*) fields like Parts Needed By and Quantity (ea). 

Note : We Will Not Share Your Information To Any Third Parties.

Please fill out below form for 13213910-01

Contact Information

“*” Required Fields Are Compulsory
   * By clicking this box, I acknowledge that I have read and accept the ASAP Semiconductor Terms and Conditions and agree that all quotes and purchase orders are exclusively subject to the ASAP Semiconductor Terms and Conditions.
  • I consent to receive email communications from ASAP Semiconductor and can unsubscribe at any time.
  • ASAP Semiconductor is a wholly independent aftermarket parts distributor.
  • This website is intended for quotations based on part numbers only. Please DO NOT submit drawings, technical data, or other specifications through this portal.

Disclaimer: This is a quotation for the goods listed above. This quotation is meant as an estimate and does not reflect a final bill or invoice. All quotations are subject to change until acceptance by ASAP Semiconductor of a binding Purchase Order, and quotations may be withdrawn or revised at the sole discretion of ASAP Semiconductor. This quotation is subject to the ASAP Semiconductor Terms & Conditions available at https://www.asapsemi.com/customer-terms-and-conditions/. All United States Government and Department of Defense bids are quoted as CAGE code 6RE77 from ASAP Semiconductor’s Anaheim, California facility. Any quotation from ASAP Semiconductor without 6RE77 is void.

NSN Information for Part Number 13213910-01 with NSN 5999-01-334-2837, 5999013342837

NSNFSCNIINCLSHazmatDEMILCancelled NSN
5999-01-334-2837

Item PartTypeName:

SHIELDING GASKET,ELECTRONIC

59990133428370PA
CIICHCCESDPMICCriticalityENAC
UAA0
Part NumberISCRNVCRNCCHCCMSDSSADC
13213910-01693

Characteristics Data of NSN 5999-01-334-2837, 5999013342837

MRCCriteriaCharacteristic
AGAVEND ITEM IDENTIFICATIONAN/TYQ-23 V)1 TACTICAL AIR OPERATIONS MODULE
CTSCOUTSIDE EDGE TO INSIDE EDGE SMALLEST DISTANCE ALONG LENGTH0.280 INCHES NOMINAL
AAGRCROSS-SECTIONAL SHAPE STYLERECTANGULAR METAL
ABMKOVERALL WIDTH0.870 INCHES MINIMUM AND 0.930 INCHES MAXIMUM
ADUEAPERTURE WIDTH0.450 INCHES MINIMUM AND 0.510 INCHES MAXIMUM
ADVDOUTSIDE EDGE TO BOLT HOLE CENTER DISTANCE ALONG WIDTH0.470 INCHES NOMINAL
CTRHOUTSIDE EDGE TO INSIDE EDGE SMALLEST DISTANCE ALONG WIDTH0.210 INCHES NOMINAL
AAUBHOLE DIAMETER0.144 INCHES NOMINAL
ADPQINSIDE CORNER RADIUS0.130 INCHES NOMINAL
ADUFAPERTURE LENGTH0.810 INCHES MINIMUM AND 0.870 INCHES MAXIMUM
ADUZCENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG LENGTH0.964 INCHES MINIMUM AND 1.004 INCHES MAXIMUM
ADVEOUTSIDE EDGE TO BOLT HOLE CENTER DISTANCE ALONG LENGTH0.210 INCHES NOMINAL
CBBLFEATURES PROVIDEDMOLDED
ABHPOVERALL LENGTH1.370 INCHES MINIMUM AND 1.430 INCHES MAXIMUM
ADVMCROSS-SECTIONAL THICKNESS0.062 INCHES NOMINAL
AECSBOLT HOLE QUANTITY2
MATTMATERIALSTEEL CORROSION RESISTING EMI/RFI CONDUCTOR
STYLSTYLE DESIGNATORNON-CIRCULAR

Semiconductor’s Certifications and Memberships



Thank You for Your Visit!

Before You Go, Take a look To Our Extensive Range of NSN Parts Catalog. We Provide High Quality NSN Parts with 24/7 Quotation Facility.

Request for Quote

We use cookies to ensure that we give you the excellent experience on our website. If you continue to use this site we will assume that you are happy with it.

bottom to top