336C282P1 by General Electric Company with NSN 5306-00-582-9213 - Submit a Quote

Part Number:  336C282P1
Manufacturer:  general electric company
Item Name :  bolt shoulder
CAGE Code:  24446
FSC:  5306 Bolts
INC Code:  04905

ASAP Aviation Procurement is pleased to announce that part number 336C282P1 of NSN 5306-00-582-9213 is now available and in stock. We can get you one of the fastest and most competitive quotes on this part. Part number 336C282P1 is a Bolt Shoulder manufactured by General Electric Company under CAGE Code 24446. Simply fill out the Request for Quote (RFQ) form provided here to get started on your quote. In order to make sure that we get you your quote in a timely manner, please take the time to make sure that all fields are completely filled out, particularly the asterisk-marked (*) fields like Parts Needed By and Quantity (ea). 

Note : We Will Not Share Your Information To Any Third Parties.

Please fill out below form for 336C282P1

Contact Information

“*” Required Fields Are Compulsory
   * By clicking this box, I acknowledge that I have read and accept the ASAP Semiconductor Terms and Conditions and agree that all quotes and purchase orders are exclusively subject to the ASAP Semiconductor Terms and Conditions.
  • I consent to receive email communications from ASAP Semiconductor and can unsubscribe at any time.
  • ASAP Semiconductor is a wholly independent aftermarket parts distributor.
  • This website is intended for quotations based on part numbers only. Please DO NOT submit drawings, technical data, or other specifications through this portal.

Disclaimer: This is a quotation for the goods listed above. This quotation is meant as an estimate and does not reflect a final bill or invoice. All quotations are subject to change until acceptance by ASAP Semiconductor of a binding Purchase Order, and quotations may be withdrawn or revised at the sole discretion of ASAP Semiconductor. This quotation is subject to the ASAP Semiconductor Terms & Conditions available at https://www.asapsemi.com/customer-terms-and-conditions/. All United States Government and Department of Defense bids are quoted as CAGE code 6RE77 from ASAP Semiconductor’s Anaheim, California facility. Any quotation from ASAP Semiconductor without 6RE77 is void.

NSN Information for Part Number 336C282P1 with NSN 5306-00-582-9213, 5306005829213

NSNFSCNIINCLSHazmatDEMILCancelled NSN
5306-00-582-9213

Item PartTypeName:

BOLT,SHOULDER

53060058292130N
CIICHCCESDPMICCriticalityENAC
UU
Part NumberISCRNVCRNCCHCCMSDSSADC
336C282P1225

Characteristics Data of NSN 5306-00-582-9213, 5306005829213

MRCCriteriaCharacteristic
AAJFTHREAD DIRECTIONRIGHT-HAND
AASATHREAD LENGTH0.160 INCHES MINIMUM AND 0.200 INCHES MAXIMUM
AASBFASTENER LENGTH0.860 INCHES MINIMUM AND 0.900 INCHES MAXIMUM
AASKHEAD STYLEHEXAGON
AASUHEAD HEIGHT0.140 INCHES MINIMUM AND 0.172 INCHES MAXIMUM
AATBWIDTH BETWEEN FLATS0.428 INCHES MINIMUM AND 0.440 INCHES MAXIMUM
AATNSHOULDER DIAMETER0.245 INCHES MINIMUM FIRST SHOULDER AND 0.247 INCHES MAXIMUM FIRST SHOULDER
AATXSHOULDER LENGTH0.630 INCHES MINIMUM FIRST SHOULDER AND 0.650 INCHES MAXIMUM FIRST SHOULDER
AAWBSHANK UNTHREADED HOLE DIAMETER0.071 INCHES MINIMUM FIRST HOLE AND 0.081 INCHES MAXIMUM FIRST HOLE
AHYMNOMINAL THREAD DIAMETER0.190 INCHES
CFSGNONSTANDARD THREAD PITCH DIAMETER0.1644 TO 0.1667 INCHES
CMLPTHREAD QUANTITY PER INCH32
CQFMHARDNESS RATING80.0 ROCKWELL C MINIMUM OVERALL
CRZSDISTANCE FROM HEAD LARGEST BEARING SURFACE TO SHANK HOLE CENTER0.780 INCHES MINIMUM FIRST HOLE AND 0.810 INCHES MAXIMUM FIRST HOLE
CWYBSHOULDER SHAPEROUND FIRST SHOULDER
MATTMATERIALSTEEL OVERALL
MDCLMATERIAL DOCUMENT AND CLASSIFICATIONB50T12A FSCM 07482 MFR REF SINGLE MATERIAL RESPONSE OVERALL
SFTTSURFACE TREATMENTCADMIUM OVERALL
THSDTHREAD SERIES DESIGNATORUNF

Semiconductor’s Certifications and Memberships



Thank You for Your Visit!

Before You Go, Take a look To Our Extensive Range of NSN Parts Catalog. We Provide High Quality NSN Parts with 24/7 Quotation Facility.

Request for Quote

We use cookies to ensure that we give you the excellent experience on our website. If you continue to use this site we will assume that you are happy with it.

bottom to top