8495556 by General Electric Company with NSN 5330-01-412-1424 - Submit a Quote

Part Number:  8495556
Manufacturer:  general electric company
Item Name :  gasket
CAGE Code:  99207
INC Code:  04522

ASAP Aviation Procurement is pleased to announce that part number 8495556 of NSN 5330-01-412-1424 is now available and in stock. We can get you one of the fastest and most competitive quotes on this part. Part number 8495556 is a Gasket manufactured by General Electric Company under CAGE Code 99207. Simply fill out the Request for Quote (RFQ) form provided here to get started on your quote. In order to make sure that we get you your quote in a timely manner, please take the time to make sure that all fields are completely filled out, particularly the asterisk-marked (*) fields like Parts Needed By and Quantity (ea). 

Note : We Will Not Share Your Information To Any Third Parties.

Please fill out below form for 8495556

Contact Information

“*” Required Fields Are Compulsory
   * By clicking this box, I acknowledge that I have read and accept the ASAP Semiconductor Terms and Conditions and agree that all quotes and purchase orders are exclusively subject to the ASAP Semiconductor Terms and Conditions.
  • I consent to receive email communications from ASAP Semiconductor and can unsubscribe at any time.
  • ASAP Semiconductor is a wholly independent aftermarket parts distributor.
  • This website is intended for quotations based on part numbers only. Please DO NOT submit drawings, technical data, or other specifications through this portal.

Disclaimer: This is a quotation for the goods listed above. This quotation is meant as an estimate and does not reflect a final bill or invoice. All quotations are subject to change until acceptance by ASAP Semiconductor of a binding Purchase Order, and quotations may be withdrawn or revised at the sole discretion of ASAP Semiconductor. This quotation is subject to the ASAP Semiconductor Terms & Conditions available at https://www.asapsemi.com/customer-terms-and-conditions/. All United States Government and Department of Defense bids are quoted as CAGE code 6RE77 from ASAP Semiconductor’s Anaheim, California facility. Any quotation from ASAP Semiconductor without 6RE77 is void.

NSN Information for Part Number 8495556 with NSN 5330-01-412-1424, 5330014121424

NSNFSCNIINCLSHazmatDEMILCancelled NSN
5330-01-412-1424

Item PartTypeName:

GASKET

53300141214240P
CIICHCCESDPMICCriticalityENAC
UA0JG
Part NumberISCRNVCRNCCHCCMSDSSADC
8495556595

Characteristics Data of NSN 5330-01-412-1424, 5330014121424

MRCCriteriaCharacteristic
ADVMCross-Sectional Thickness0.011 INCHES MINIMUM AND 0.021 INCHES MAXIMUM
ADVEOutside Edge To Bolt Hole Center Distance Along Length0.271 INCHES MINIMUM AND 0.291 INCHES MAXIMUM
AECSBolt Hole Quantity4
ADVDOutside Edge To Bolt Hole Center Distance Along Width0.271 INCHES MINIMUM AND 0.291 INCHES MAXIMUM
AAUBHole Diameter0.281 INCHES MINIMUM
ABHPOverall Length2.428 INCHES MINIMUM AND 2.448 INCHES MAXIMUM
MRCDecoded RequirementClear Text Reply
FEATSpecial FeaturesCONTAINS NON-ASBESTOS MATERIAL
MATTMaterialPLASTIC POLYAMIDE OVERALL AND FIBER OVERALL AND RUBBER BUTADIENE NITRILE OVERALL
ENACEnvironmental Attribute CodeASBESTOS ALTERNATIVE PRODUCTS
ABVLAperture Diameter1.562 INCHES NOMINAL
ADUYCenter To Center Distance Between Bolt Holes Along Width1.865 INCHES MINIMUM AND 1.885 INCHES MAXIMUM
MDCLMaterial Document And ClassificationA50TF268, CAGEC 24446 MFR REF SINGLE MATERIAL RESPONSE OVERALL
ADUZCenter To Center Distance Between Bolt Holes Along Length1.865 INCHES MINIMUM AND 1.885 INCHES MAXIMUM
ABMKOverall Width2.428 INCHES MINIMUM AND 2.448 INCHES MAXIMUM
ADPWOutside Corner Radius0.271 INCHES MINIMUM AND 0.291 INCHES MAXIMUM
STYLStyle DesignatorNON-CIRCULAR

Semiconductor’s Certifications and Memberships



Thank You for Your Visit!

Before You Go, Take a look To Our Extensive Range of NSN Parts Catalog. We Provide High Quality NSN Parts with 24/7 Quotation Facility.

Request for Quote

We use cookies to ensure that we give you the excellent experience on our website. If you continue to use this site we will assume that you are happy with it.

bottom to top