P815-2C by Lockheed Martin Corporation with NSN 5365-01-275-6276 - Submit a Quote

Part Number:  P815-2C
Alternate P/N:  P8152C
Manufacturer:  lockheed martin corporation
Item Name :  shim
CAGE Code:  81755
INC Code:  20349

ASAP Aviation Procurement is pleased to announce that part number P815-2C of NSN 5365-01-275-6276 is now available and in stock. We can get you one of the fastest and most competitive quotes on this part. Part number P815-2C is a Shim manufactured by Lockheed Martin Corporation under CAGE Code 81755. Simply fill out the Request for Quote (RFQ) form provided here to get started on your quote. In order to make sure that we get you your quote in a timely manner, please take the time to make sure that all fields are completely filled out, particularly the asterisk-marked (*) fields like Parts Needed By and Quantity (ea). 

Note : We Will Not Share Your Information To Any Third Parties.

Please fill out below form for P815-2C

Contact Information

“*” Required Fields Are Compulsory
   * By clicking this box, I acknowledge that I have read and accept the ASAP Semiconductor Terms and Conditions and agree that all quotes and purchase orders are exclusively subject to the ASAP Semiconductor Terms and Conditions.
  • I consent to receive email communications from ASAP Semiconductor and can unsubscribe at any time.
  • ASAP Semiconductor is a wholly independent aftermarket parts distributor.
  • This website is intended for quotations based on part numbers only. Please DO NOT submit drawings, technical data, or other specifications through this portal.
Verify you’re human

Disclaimer: This is a quotation for the goods listed above. This quotation is meant as an estimate and does not reflect a final bill or invoice. All quotations are subject to change until acceptance by ASAP Semiconductor of a binding Purchase Order, and quotations may be withdrawn or revised at the sole discretion of ASAP Semiconductor. This quotation is subject to the ASAP Semiconductor Terms & Conditions available at https://www.asapsemi.com/customer-terms-and-conditions/. All United States Government and Department of Defense bids are quoted as CAGE code 6RE77 from ASAP Semiconductor’s Anaheim, California facility. Any quotation from ASAP Semiconductor without 6RE77 is void.

NSN Information for Part Number P815-2C with NSN 5365-01-275-6276, 5365012756276

NSNFSCNIINCLSHazmatDEMILCancelled NSN
5365-01-275-6276

Item PartTypeName:

SHIM

53650127562760N
CIICHCCESDPMICCriticalityENAC
UA0
Part NumberISCRNVCRNCCHCCMSDSSADC
P815-2C523

Characteristics Data of NSN 5365-01-275-6276, 5365012756276

MRCCriteriaCharacteristic
AAUBHOLE DIAMETER0.240 INCHES MINIMUM AND 0.260 INCHES MAXIMUM
ABHPOVERALL LENGTH1.470 INCHES MINIMUM AND 1.530 INCHES MAXIMUM
ABMKOVERALL WIDTH1.350 INCHES MINIMUM AND 1.410 INCHES MAXIMUM
ADUYCENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG WIDTH0.710 INCHES MINIMUM AND 0.770 INCHES MAXIMUM
ADUZCENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG LENGTH0.710 INCHES MINIMUM AND 0.770 INCHES MAXIMUM
ADVDOUTSIDE EDGE TO BOLT HOLE CENTER DISTANCE ALONG WIDTH0.290 INCHES MINIMUM AND 0.350 INCHES MAXIMUM
ADVEOUTSIDE EDGE TO BOLT HOLE CENTER DISTANCE ALONG LENGTH0.350 INCHES MINIMUM AND 0.410 INCHES MAXIMUM
AECSBOLT HOLE QUANTITY4
AGAVEND ITEM IDENTIFICATIONROTARY ACTUATOR/INSTALLATION,F-16C/D COMMON
CQCFCONSTRUCTIONONE-PIECE
FEATSPECIAL FEATURESTAB 0.190 IN. MIN AND 0.210 IN. MAX ALONG LENGTH AND 1.350 IN. MIN AND 1.410 IN. MAX ALONG WIDTH WITH 0.06 IN. BEND,30 DEGREE RADIUS
MATTMATERIALALUMINUM ALLOY 6061
MDCLMATERIAL DOCUMENT AND CLASSIFICATIONQQ-A-250/11 FED SPEC SINGLE MATERIAL RESPONSE
SFTTSURFACE TREATMENTCHROMATE
STDCSURFACE TREATMENT DOCUMENT AND CLASSIFICATIONMIL-C-5541,CLASS 3 MIL SPEC SINGLE TREATMENT RESPONSE
STYLSTYLE DESIGNATORNON-CIRCULAR W/BOLT HOLES

Semiconductor’s Certifications and Memberships



Thank You for Your Visit!

Before You Go, Take a look To Our Extensive Range of NSN Parts Catalog. We Provide High Quality NSN Parts with 24/7 Quotation Facility.

Request for Quote

We use cookies to ensure that we give you the excellent experience on our website. If you continue to use this site we will assume that you are happy with it.

bottom to top