NAS54-12 by National Aerospace Standards Com with NSN 5306-00-180-1738 - Submit a Quote

Part Number:  NAS54-12
Alternate P/N:  NAS5412
Item Name :  bolt close tolerance
CAGE Code:  80205
FSC:  5306 Bolts
INC Code:  27851

ASAP Aviation Procurement is pleased to announce that part number NAS54-12 of NSN 5306-00-180-1738 is now available and in stock. We can get you one of the fastest and most competitive quotes on this part. Part number NAS54-12 is a Bolt Close Tolerance manufactured by National Aerospace Standards Com under CAGE Code 80205. Simply fill out the Request for Quote (RFQ) form provided here to get started on your quote. In order to make sure that we get you your quote in a timely manner, please take the time to make sure that all fields are completely filled out, particularly the asterisk-marked (*) fields like Parts Needed By and Quantity (ea). 

Note : We Will Not Share Your Information To Any Third Parties.

Please fill out below form for NAS54-12

Contact Information

“*” Required Fields Are Compulsory
   * By clicking this box, I acknowledge that I have read and accept the ASAP Semiconductor Terms and Conditions and agree that all quotes and purchase orders are exclusively subject to the ASAP Semiconductor Terms and Conditions.
  • I consent to receive email communications from ASAP Semiconductor and can unsubscribe at any time.
  • ASAP Semiconductor is a wholly independent aftermarket parts distributor.
  • This website is intended for quotations based on part numbers only. Please DO NOT submit drawings, technical data, or other specifications through this portal.

Disclaimer: This is a quotation for the goods listed above. This quotation is meant as an estimate and does not reflect a final bill or invoice. All quotations are subject to change until acceptance by ASAP Semiconductor of a binding Purchase Order, and quotations may be withdrawn or revised at the sole discretion of ASAP Semiconductor. This quotation is subject to the ASAP Semiconductor Terms & Conditions available at https://www.asapsemi.com/customer-terms-and-conditions/. All United States Government and Department of Defense bids are quoted as CAGE code 6RE77 from ASAP Semiconductor’s Anaheim, California facility. Any quotation from ASAP Semiconductor without 6RE77 is void.

NSN Information for Part Number NAS54-12 with NSN 5306-00-180-1738, 5306001801738

NSNFSCNIINCLSHazmatDEMILCancelled NSN
5306-00-180-1738

Item PartTypeName:

BOLT,CLOSE TOLERANCE

53060018017380N
CIICHCCESDPMICCriticalityENAC
UA0
Part NumberISCRNVCRNCCHCCMSDSSADC
AN174-12122

Characteristics Data of NSN 5306-00-180-1738, 5306001801738

MRCCriteriaCharacteristic
AAJDTHREAD CLASS3A
AAJFTHREAD DIRECTIONRIGHT-HAND
AASATHREAD LENGTH0.438 INCHES MINIMUM AND 0.515 INCHES MAXIMUM
AASBFASTENER LENGTH1.266 INCHES MINIMUM AND 1.312 INCHES MAXIMUM
AASKHEAD STYLEHEXAGON
AASUHEAD HEIGHT0.140 INCHES MINIMUM AND 0.172 INCHES MAXIMUM
AATBWIDTH BETWEEN FLATS0.428 INCHES MINIMUM AND 0.440 INCHES MAXIMUM
AAURGRIP DIAMETER0.2487 INCHES MINIMUM AND 0.2492 INCHES MAXIMUM
AAWBSHANK UNTHREADED HOLE DIAMETER0.076 INCHES MINIMUM AND 0.086 INCHES MAXIMUM FIRST HOLE
AHYMNOMINAL THREAD DIAMETER0.250 INCHES
ANEEGRIP LENGTH0.797 INCHES MINIMUM AND 0.844 INCHES MAXIMUM
CMLPTHREAD QUANTITY PER INCH28
CQBCMINIMUM TENSILE STRENGTH125000 POUNDS PER SQUARE INCH
CQFMHARDNESS RATING26.0 ROCKWELL C MINIMUM AND 32.0 ROCKWELL C MAXIMUM OVERALL
CRZSDISTANCE FROM HEAD LARGEST BEARING SURFACE TO SHANK HOLE CENTER1.109 INCHES MINIMUM AND 1.141 INCHES MAXIMUM FIRST HOLE
MATTMATERIALSTEEL COMP 4140 OR STEEL COMP 8740 OR STEEL COMP 8630 OR STEEL COMP 8735 OR STEEL COMP 4130 OR STEEL COMP 4037 OVERALL
SFTTSURFACE TREATMENTCADMIUM AND CHROMATE OVERALL
STDCSURFACE TREATMENT DOCUMENT AND CLASSIFICATIONQQ-P-416,TY 2,CL 3 FED SPEC ALL TREATMENT RESPONSES OVERALL
THSDTHREAD SERIES DESIGNATORUNF

Semiconductor’s Certifications and Memberships



Thank You for Your Visit!

Before You Go, Take a look To Our Extensive Range of NSN Parts Catalog. We Provide High Quality NSN Parts with 24/7 Quotation Facility.

Request for Quote

We use cookies to ensure that we give you the excellent experience on our website. If you continue to use this site we will assume that you are happy with it.

bottom to top