124655 by Parker Hannifin Corporation with NSN 4720-00-821-5185 - Submit a Quote

Part Number:  124655
Manufacturer:  parker hannifin corporation
CAGE Code:  98441
INC Code:  20311

ASAP Aviation Procurement is pleased to announce that part number 124655 of NSN 4720-00-821-5185 is now available and in stock. We can get you one of the fastest and most competitive quotes on this part. Part number 124655 is a Hose Assembly Nonmetallic manufactured by Parker Hannifin Corporation under CAGE Code 98441. Simply fill out the Request for Quote (RFQ) form provided here to get started on your quote. In order to make sure that we get you your quote in a timely manner, please take the time to make sure that all fields are completely filled out, particularly the asterisk-marked (*) fields like Parts Needed By and Quantity (ea). 

Note : We Will Not Share Your Information To Any Third Parties.

Please fill out below form for 124655

Contact Information

“*” Required Fields Are Compulsory
   * By clicking this box, I acknowledge that I have read and accept the ASAP Semiconductor Terms and Conditions and agree that all quotes and purchase orders are exclusively subject to the ASAP Semiconductor Terms and Conditions.
  • I consent to receive email communications from ASAP Semiconductor and can unsubscribe at any time.
  • ASAP Semiconductor is a wholly independent aftermarket parts distributor.
  • This website is intended for quotations based on part numbers only. Please DO NOT submit drawings, technical data, or other specifications through this portal.

Disclaimer: This is a quotation for the goods listed above. This quotation is meant as an estimate and does not reflect a final bill or invoice. All quotations are subject to change until acceptance by ASAP Semiconductor of a binding Purchase Order, and quotations may be withdrawn or revised at the sole discretion of ASAP Semiconductor. This quotation is subject to the ASAP Semiconductor Terms & Conditions available at https://www.asapsemi.com/customer-terms-and-conditions/. All United States Government and Department of Defense bids are quoted as CAGE code 6RE77 from ASAP Semiconductor’s Anaheim, California facility. Any quotation from ASAP Semiconductor without 6RE77 is void.

NSN Information for Part Number 124655 with NSN 4720-00-821-5185, 4720008215185

NSNFSCNIINCLSHazmatDEMILCancelled NSN
4720-00-821-5185

Item PartTypeName:

HOSE ASSEMBLY,NONMETALLIC

47200082151850N
CIICHCCESDPMICCriticalityENAC
UU
Part NumberISCRNVCRNCCHCCMSDSSADC
124655295

Characteristics Data of NSN 4720-00-821-5185, 4720008215185

MRCCriteriaCharacteristic
AKUTEND FLANGE CONSTRUCTIONSOLID 1ST END
AKUTEND FLANGE CONSTRUCTIONSOLID 2ND END
AKUUEND CONNECTION DESIGNSTRAIGHT 1ST END
AWLSCONNECTION TYPEPLAIN FACE FLANGE 2ND END
AWLSCONNECTION TYPERECESSED FLANGE 1ST END
CQBDBURST TEST PRESSURE3000.0 POUNDS PER SQUARE INCH
CQCSLAYER COMPOSITION AND LOCATION1ST LAYER BRAIDED CORROSION RESISTANT STEEL WIRE AND OUTER LAYER BRAIDED CORROSION RESISTANT STEEL WIRE
CRFYFLOW ANGLE90.0 DEGREES 2ND END
CRJMOUTER COVERING ENVIRONMENTAL PROTECTIONCORROSION RESISTANT
CRWLINSIDE SURFACE CONDITIONSMOOTH
CTCJFLANGE STYLERECTANGULAR INCLUDES SQUARE) 2ND END
AARXINSIDE DIAMETER1.344 INCHES MINIMUM AND 1.406 INCHES MAXIMUM
ABKUFLANGE THICKNESS0.300 INCHES NOMINAL 1ST END
ABKUFLANGE THICKNESS0.300 INCHES NOMINAL 2ND END
ABKVOUTSIDE DIAMETER1.633 INCHES MINIMUM AND 1.711 INCHES MAXIMUM
ABMDRECESS DIAMETER1.100 INCHES NOMINAL 1ST END
ABMHRECESS DEPTH0.118 INCHES NOMINAL 1ST END
ACKHMINIMUM INSIDE BENDING RADIUS14.000 INCHES
ADUYCENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG WIDTH1.306 INCHES NOMINAL 2ND END
ADUYCENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG WIDTH1.650 INCHES NOMINAL 1ST END
ADUZCENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG LENGTH1.306 INCHES NOMINAL 2ND END
AECSBOLT HOLE QUANTITY4 2ND END
AFQNFLANGE LENGTH1.770 INCHES NOMINAL 2ND END
AFQNFLANGE LENGTH2.230 INCHES NOMINAL 1ST END
AHNCCONNECTION STYLEPLAIN SWIVEL 2ND END
AHNXBOLT HOLE DIAMETER0.250 INCHES NOMINAL 2ND END
AHNXBOLT HOLE DIAMETER0.270 INCHES NOMINAL 1ST END
AKUUEND CONNECTION DESIGNELBOW 2ND END
CQGMMAXIMUM OPERATING PRESSURE1000.0 POUNDS PER SQUARE INCH
CRDWHYDROSTATIC TEST PRESSURE2000.0 POUNDS PER SQUARE INCH
CRXXMEASURING METHOD AND LENGTH18.000 INCHES NOMINAL OVERALL
CTCJFLANGE STYLERECTANGULAR INCLUDES SQUARE) 1ST END
SUPPSUPPLEMENTARY FEATURESTHIS ITEM HAS BEEN REVIEWED FOR ASBESTOS MATERIAL THE CURRENT APPROVED SOURCES 50599 HAVE INDICATED THEIR PART NUMBER CONTAINED ASBESTOS PRIOR TO 1984,THEY CONTINUE TO MANUFACTURE THE SAME PART NUMBER WITHOUT ASBESTOS MATERIAL AFTER 1984
AAGRCROSS-SECTIONAL SHAPE STYLEROUND
ABJHTEMP RATING-65.0 DEG FAHRENHEIT AND 450.0 DEG FAHRENHEIT SINGLE RESPONSE
ADJSEXTERIOR COLORNATURAL
ADUZCENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG LENGTH1.650 INCHES NOMINAL 1ST END
AECSBOLT HOLE QUANTITY4 1ST END
AGFFFLANGE WIDTH1.770 INCHES NOMINAL 2ND END
AGFFFLANGE WIDTH2.230 INCHES NOMINAL 1ST END
AHNCCONNECTION STYLERECESSED 1ST END

Semiconductor’s Certifications and Memberships



Thank You for Your Visit!

Before You Go, Take a look To Our Extensive Range of NSN Parts Catalog. We Provide High Quality NSN Parts with 24/7 Quotation Facility.

Request for Quote

We use cookies to ensure that we give you the excellent experience on our website. If you continue to use this site we will assume that you are happy with it.

bottom to top