75A500803-2003 by Plastifab Incorporated with NSN 5340-01-193-2743 - Submit a Quote

Part Number:  75A500803-2003
Alternate P/N:  75A5008032003
Manufacturer:  plastifab incorporated
Item Name :  clamp block section
CAGE Code:  58870
INC Code:  39404

ASAP Aviation Procurement is pleased to announce that part number 75A500803-2003 of NSN 5340-01-193-2743 is now available and in stock. We can get you one of the fastest and most competitive quotes on this part. Part number 75A500803-2003 is a Clamp Block Section manufactured by Plastifab Incorporated under CAGE Code 58870. Simply fill out the Request for Quote (RFQ) form provided here to get started on your quote. In order to make sure that we get you your quote in a timely manner, please take the time to make sure that all fields are completely filled out, particularly the asterisk-marked (*) fields like Parts Needed By and Quantity (ea). 

Note : We Will Not Share Your Information To Any Third Parties.

Please fill out below form for 75A500803-2003

Contact Information

“*” Required Fields Are Compulsory
   * By clicking this box, I acknowledge that I have read and accept the ASAP Semiconductor Terms and Conditions and agree that all quotes and purchase orders are exclusively subject to the ASAP Semiconductor Terms and Conditions.
  • I consent to receive email communications from ASAP Semiconductor and can unsubscribe at any time.
  • ASAP Semiconductor is a wholly independent aftermarket parts distributor.
  • This website is intended for quotations based on part numbers only. Please DO NOT submit drawings, technical data, or other specifications through this portal.

Disclaimer: This is a quotation for the goods listed above. This quotation is meant as an estimate and does not reflect a final bill or invoice. All quotations are subject to change until acceptance by ASAP Semiconductor of a binding Purchase Order, and quotations may be withdrawn or revised at the sole discretion of ASAP Semiconductor. This quotation is subject to the ASAP Semiconductor Terms & Conditions available at https://www.asapsemi.com/customer-terms-and-conditions/. All United States Government and Department of Defense bids are quoted as CAGE code 6RE77 from ASAP Semiconductor’s Anaheim, California facility. Any quotation from ASAP Semiconductor without 6RE77 is void.

NSN Information for Part Number 75A500803-2003 with NSN 5340-01-193-2743, 5340011932743

NSNFSCNIINCLSHazmatDEMILCancelled NSN
5340-01-193-2743

Item PartTypeName:

CLAMP,BLOCK,SECTION

53400119327430P
CIICHCCESDPMICCriticalityENAC
UA
Part NumberISCRNVCRNCCHCCMSDSSADC
75A500803-200351C9

Characteristics Data of NSN 5340-01-193-2743, 5340011932743

MRCCriteriaCharacteristic
ABHPOVERALL LENGTH4.300 INCHES NOMINAL
ABMKOVERALL WIDTH0.500 INCHES NOMINAL
ABTBMOUNTING HOLE DIAMETER0.195 INCHES MINIMUM AND 0.202 INCHES MAXIMUM
ABTJMOUNTING HOLE QUANTITY2
AFECDISTANCE FROM CENTER OF MOUNTING HOLE TO EDGE ALONG THE WIDTH0.250 INCHES NOMINAL
AXPCCENTER TO CENTER DISTANCE BETWEEN FIRST AND SECOND MOUNTING HOLES3.148 INCHES MINIMUM AND 3.152 INCHES MAXIMUM
AZGMMOUNTING FACILITYUNTHREADED HOLE
BYGGBLOCK HEIGHT0.700 INCHES NOMINAL
CWTDCLAMPING HOLE QUANTITY3
CWWMCLAMPING HOLE DIAMETER0.250 INCHES MINIMUM FIRST HOLE AND 0.254 INCHES MAXIMUM FIRST HOLE
CWWMCLAMPING HOLE DIAMETER0.500 INCHES MINIMUM SECOND HOLE AND 0.504 INCHES MAXIMUM SECOND HOLE
CWWMCLAMPING HOLE DIAMETER0.750 INCHES MINIMUM THIRD HOLE AND 0.754 INCHES MAXIMUM THIRD HOLE
CWXCDISTANCE FROM END TO FIRST MOUNTING HOLE CENTER0.890 INCHES NOMINAL
CWXNDISTANCE FROM END TO FIRST CLAMPING HOLE CENTER0.418 INCHES MINIMUM AND 0.422 INCHES MAXIMUM
CWXZCENTER TO CENTER DISTANCE BETWEEN FIRST AND SECOND CLAMPING HOLES1.238 INCHES MINIMUM AND 1.242 INCHES MAXIMUM
CWYCCENTER TO CENTER DISTANCE BETWEEN FIRST AND THIRD CLAMPING HOLES2.880 INCHES NOMINAL
MATTMATERIALPLASTIC

Semiconductor’s Certifications and Memberships



Thank You for Your Visit!

Before You Go, Take a look To Our Extensive Range of NSN Parts Catalog. We Provide High Quality NSN Parts with 24/7 Quotation Facility.

Request for Quote

We use cookies to ensure that we give you the excellent experience on our website. If you continue to use this site we will assume that you are happy with it.

bottom to top