55-50-265 by Samarius Precision Instruments Inc with NSN 5905-00-066-3270 - Submit a Quote

Part Number:  55-50-265
Alternate P/N:  5550265
CAGE Code:  18065
INC Code:  37406

ASAP Aviation Procurement is pleased to announce that part number 55-50-265 of NSN 5905-00-066-3270 is now available and in stock. We can get you one of the fastest and most competitive quotes on this part. Part number 55-50-265 is a Resistor Variable Wire Wound Non manufactured by Samarius Precision Instruments Inc under CAGE Code 18065. Simply fill out the Request for Quote (RFQ) form provided here to get started on your quote. In order to make sure that we get you your quote in a timely manner, please take the time to make sure that all fields are completely filled out, particularly the asterisk-marked (*) fields like Parts Needed By and Quantity (ea). 

Note : We Will Not Share Your Information To Any Third Parties.

Please fill out below form for 55-50-265

Contact Information

“*” Required Fields Are Compulsory
   * By clicking this box, I acknowledge that I have read and accept the ASAP Semiconductor Terms and Conditions and agree that all quotes and purchase orders are exclusively subject to the ASAP Semiconductor Terms and Conditions.
  • I consent to receive email communications from ASAP Semiconductor and can unsubscribe at any time.
  • ASAP Semiconductor is a wholly independent aftermarket parts distributor.
  • This website is intended for quotations based on part numbers only. Please DO NOT submit drawings, technical data, or other specifications through this portal.

Disclaimer: This is a quotation for the goods listed above. This quotation is meant as an estimate and does not reflect a final bill or invoice. All quotations are subject to change until acceptance by ASAP Semiconductor of a binding Purchase Order, and quotations may be withdrawn or revised at the sole discretion of ASAP Semiconductor. This quotation is subject to the ASAP Semiconductor Terms & Conditions available at https://www.asapsemi.com/customer-terms-and-conditions/. All United States Government and Department of Defense bids are quoted as CAGE code 6RE77 from ASAP Semiconductor’s Anaheim, California facility. Any quotation from ASAP Semiconductor without 6RE77 is void.

NSN Information for Part Number 55-50-265 with NSN 5905-00-066-3270, 5905000663270

NSNFSCNIINCLSHazmatDEMILCancelled NSN
5905-00-066-3270

Item PartTypeName:

RESISTOR,VARIABLE,WIRE WOUND,NON

59050006632700NB
CIICHCCESDPMICCriticalityENAC
UBU
Part NumberISCRNVCRNCCHCCMSDSSADC
2JC3643H04REVAA223

Characteristics Data of NSN 5905-00-066-3270, 5905000663270

MRCCriteriaCharacteristic
AAPNSECTION QUANTITY1
AAQLBODY STYLECYLINDRICAL SERVO MOUNTED
AARGRELIABILITY INDICATORNOT ESTABLISHED
AAVLPILOT DIAMETER0.7500 INCHES NOMINAL
AAVMPILOT LENGTH0.0620 INCHES NOMINAL
ABHPOVERALL LENGTH1.095 INCHES MAXIMUM
ABPAUNDERCUT DIAMETER0.750 INCHES NOMINAL
ABPCUNDERCUT WIDTH0.0620 INCHES NOMINAL
ABPMBODY DIAMETER0.875 INCHES MAXIMUM
ABWVSHAFT DIAMETER0.1249 INCHES NOMINAL
ABXFSHAFT LENGTH0.410 INCHES NOMINAL
ADAQBODY LENGTH0.685 INCHES MAXIMUM
ADAVOVERALL DIAMETER1.250 INCHES MAXIMUM
AECZMOUNTING LIP DIAMETER0.8750 INCHES NOMINAL
AEDAMOUNTING LIP DEPTH0.0620 INCHES NOMINAL
AEDXSHAFT STYLEROUND
AEDZSHAFT BEARING TYPEBEARING
AEFDACTUATOR TYPESINGLE SHAFT
AEFHEFFECTIVE ELECTRICAL ROTATION IN DEG ANGULAR ROTATION127.0 MINIMUM
AEFLMAXIMUM RUNNING TORQUE0.25 INCH-OUNCES
AEFYSHAFT END PLAY0.002 INCHES
AEGALATERAL RUNOUT0.0015 INCHES
AEGCSHAFT RADIAL PLAY0.001 INCHES
APXHTERMINAL LOCATIONRADIALLY POSITIONED OVER LESS THAN HALF THE CIRCUMFERENCE
AXGYMOUNTING METHODCLAMP RING
CQCCELECTRICAL RESISTANCE PER SECTION10.0 KILOHMS SINGLE SECTION
CQCKROTARY ACTUATOR TRAVEL IN ANGULAR DEG360.0 NOMINAL
CQGNAMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER150.0 SINGLE SECTION
CRGDPOWER DISSIPATION RATING PER SECTION IN WATTS2.0 FREE AIR SINGLE SECTION
CRSSRESISTANCE TOLERANCE PER SECTION IN PERCENT-3.0 TO 3.0 SINGLE SECTION
CRSXACTUATOR TRAVEL CONTROL FEATURECONTINUOUS MOTION
CSDHAMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER85.0 SINGLE SECTION
TESTTEST DATA DOCUMENT79500-2JC3643 DRAWING THIS IS THE BASIC GOVERNING DRAWING,SUCH AS A CONTRACTOR DRAWING,ORIGINAL EQUIPMENT MANUFACTURER DRAWING,ETC. EXCLUDES ANY SPECIFICATION,STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAW
TTQYTERMINAL TYPE AND QUANTITY3 TURRET

Semiconductor’s Certifications and Memberships



Thank You for Your Visit!

Before You Go, Take a look To Our Extensive Range of NSN Parts Catalog. We Provide High Quality NSN Parts with 24/7 Quotation Facility.

Request for Quote

We use cookies to ensure that we give you the excellent experience on our website. If you continue to use this site we will assume that you are happy with it.

bottom to top