2950-6012 by Sv Microwave Inc with NSN 5935-00-975-3605 - Submit a Quote

Part Number:  2950-6012
Alternate P/N:  29506012
Manufacturer:  sv microwave inc
CAGE Code:  95077
INC Code:  15093

ASAP Aviation Procurement is pleased to announce that part number 2950-6012 of NSN 5935-00-975-3605 is now available and in stock. We can get you one of the fastest and most competitive quotes on this part. Part number 2950-6012 is a Connector Receptacle Electrical manufactured by Sv Microwave Inc under CAGE Code 95077. Simply fill out the Request for Quote (RFQ) form provided here to get started on your quote. In order to make sure that we get you your quote in a timely manner, please take the time to make sure that all fields are completely filled out, particularly the asterisk-marked (*) fields like Parts Needed By and Quantity (ea). 

Note : We Will Not Share Your Information To Any Third Parties.

Please fill out below form for 2950-6012

Contact Information

“*” Required Fields Are Compulsory
   * By clicking this box, I acknowledge that I have read and accept the ASAP Semiconductor Terms and Conditions and agree that all quotes and purchase orders are exclusively subject to the ASAP Semiconductor Terms and Conditions.
  • I consent to receive email communications from ASAP Semiconductor and can unsubscribe at any time.
  • ASAP Semiconductor is a wholly independent aftermarket parts distributor.
  • This website is intended for quotations based on part numbers only. Please DO NOT submit drawings, technical data, or other specifications through this portal.
Generate New Image

Type the code from the image

Disclaimer: This is a quotation for the goods listed above. This quotation is meant as an estimate and does not reflect a final bill or invoice. All quotations are subject to change until acceptance by ASAP Semiconductor of a binding Purchase Order, and quotations may be withdrawn or revised at the sole discretion of ASAP Semiconductor. This quotation is subject to the ASAP Semiconductor Terms & Conditions available at https://www.asapsemi.com/customer-terms-and-conditions/. All United States Government and Department of Defense bids are quoted as CAGE code 6RE77 from ASAP Semiconductor’s Anaheim, California facility. Any quotation from ASAP Semiconductor without 6RE77 is void.

NSN Information for Part Number 2950-6012 with NSN 5935-00-975-3605, 5935009753605

NSNFSCNIINCLSHazmatDEMILCancelled NSN
5935-00-975-3605

Item PartTypeName:

CONNECTOR,RECEPTACLE,ELECTRICAL

59350097536050PA
CIICHCCESDPMICCriticalityENAC
UAG
Part NumberISCRNVCRNCCHCCMSDSSADC
134191-0001225

Characteristics Data of NSN 5935-00-975-3605, 5935009753605

MRCCriteriaCharacteristic
AEBVUNTHREADED MOUNTING HOLE DIAMETER0.102 INCHES NOMINAL
AEBWCENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO HEIGHT0.340 INCHES NOMINAL
AEHADISTANCE BETWEEN CENTERLINES OF MOUNTING FACILITIES PARALLEL TO BODY WIDTH0.340 INCHES NOMINAL
AFQKDISTANCE FROM MOUNTING SHOULDER TO FRONT FACE0.315 INCHES NOMINAL
AFQRTHREADED DEVICE TYPECOUPLING FACILITY
AFQWMATING END QUANTITY1
AFQXCONTACT POSITION ARRANGEMENT STYLESMA SINGLE MATING END
AFQZCONTACT REMOVABILITYNONREMOVABLE SINGLE MATING END SINGLE CONTACT GROUPING
AFRDCONTACT MAXIMUM AC VOLTAGE RATING IN VOLTS500.0 SINGLE MATING END SINGLE CONTACT GROUPING
AFRFCONTACT MAXIMUM FREQUENCY RATING12400.0 MEGAHERTZ SINGLE MATING END SINGLE CONTACT GROUPING
AFRTSHELL TYPESOLID
AFRVCONNECTOR LOCKING METHODEXTERNALLY THREADED SHELL
AFRYRADIO FREQUENCY TYPE CONTACT CHARACTERISTIC IMPEDANCE IN OHMS50.0 SINGLE MATING END SINGLE CONTACT GROUPING
CMLPTHREAD QUANTITY PER INCH36
CQJXNOMINAL THREAD SIZE0.250 INCHES
CQTMTERMINAL LOCATIONBACK SINGLE MATING END SINGLE CONTACT GROUPING
CQTZCONTACT MATERIALCOPPER ALLOY SINGLE MATING END SINGLE CONTACT GROUPING
CQYHCONTACT SURFACE TREATMENTGOLD SINGLE MATING END SINGLE CONTACT GROUPING
CQZGINSERT MATERIALPLASTIC FLUORINATED ETHYLENE PROPYLENE SINGLE MATING END OR PLASTIC POLYTETRAFLUOROETHYLENE SINGLE MATING END
CRBJCONTACT SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONMIL-G-45204 MIL SPEC SINGLE TREATMENT RESPONSE SINGLE MATING END SINGLE CONTACT GROUPING
CSCFTERMINAL TYPESOLDER WELL SINGLE MATING END SINGLE CONTACT GROUPING
CSPTSHELL MATERIALSTEEL CORROSION RESISTING
CSWMSHELL SURFACE TREATMENTPASSIVATE
CTBCSHELL SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONQQ-P-35,TY 1,2 OR 3 FED SPEC SINGLE TREATMENT RESPONSE
CTHHSHELL MATERIAL DOCUMENT AND CLASSIFICATIONQQ-S-763,CL 303,CONDITION A FED SPEC SINGLE MATERIAL RESPONSE
CTKLINSERT MATERIAL DOCUMENT AND CLASSIFICATIONL-P-389 FED SPEC SINGLE MATERIAL RESPONSE SINGLE MATING END OR L-P-403 FED SPEC SINGLE MATERIAL RESPONSE SINGLE MATING END
CXCGINCLUDED CONTACT QUANTITY1 SINGLE MATING END SINGLE CONTACT GROUPING
CXCLINCLUDED CONTACT TYPECOAXIAL SOCKET SINGLE MATING END SINGLE CONTACT GROUPING
PMLCPRECIOUS MATERIAL AND LOCATIONCONTACT SURFACE GOLD
PMWTPRECIOUS MATERIAL AND WEIGHT0.005 GOLD GRAINS,TROY
PRMTPRECIOUS MATERIALGOLD
THSDTHREAD SERIES DESIGNATORUNS
AAJDTHREAD CLASS2A
AAJFTHREAD DIRECTIONRIGHT-HAND
AAQLBODY STYLESTRAIGHT SHAPE,EXTERNAL COUPLING
ABHPOVERALL LENGTH0.556 INCHES MINIMUM AND 0.594 INCHES MAXIMUM
ABKWOVERALL HEIGHT0.500 INCHES NOMINAL
ABMKOVERALL WIDTH0.500 INCHES NOMINAL
ADZCENVIRONMENTAL PROTECTIONSHOCK RESISTANT AND PRESSURE PROOF

Semiconductor’s Certifications and Memberships



Thank You for Your Visit!

Before You Go, Take a look To Our Extensive Range of NSN Parts Catalog. We Provide High Quality NSN Parts with 24/7 Quotation Facility.

Request for Quote

We use cookies to ensure that we give you the excellent experience on our website. If you continue to use this site we will assume that you are happy with it.

bottom to top