301-00H25K by Vamistor Corp with NSN 5905-00-722-3825 - Submit a Quote

Part Number:  301-00H25K
Alternate P/N:  30100H25K
Manufacturer:  vamistor corp
CAGE Code:  0EBU2
INC Code:  37406

ASAP Aviation Procurement is pleased to announce that part number 301-00H25K of NSN 5905-00-722-3825 is now available and in stock. We can get you one of the fastest and most competitive quotes on this part. Part number 301-00H25K is a Resistor Variable Wire Wound Non manufactured by Vamistor Corp under CAGE Code 0EBU2. Simply fill out the Request for Quote (RFQ) form provided here to get started on your quote. In order to make sure that we get you your quote in a timely manner, please take the time to make sure that all fields are completely filled out, particularly the asterisk-marked (*) fields like Parts Needed By and Quantity (ea). 

Note : We Will Not Share Your Information To Any Third Parties.

Please fill out below form for 301-00H25K

Contact Information

“*” Required Fields Are Compulsory
   * By clicking this box, I acknowledge that I have read and accept the ASAP Semiconductor Terms and Conditions and agree that all quotes and purchase orders are exclusively subject to the ASAP Semiconductor Terms and Conditions.
  • I consent to receive email communications from ASAP Semiconductor and can unsubscribe at any time.
  • ASAP Semiconductor is a wholly independent aftermarket parts distributor.
  • This website is intended for quotations based on part numbers only. Please DO NOT submit drawings, technical data, or other specifications through this portal.
Verify you’re human

Disclaimer: This is a quotation for the goods listed above. This quotation is meant as an estimate and does not reflect a final bill or invoice. All quotations are subject to change until acceptance by ASAP Semiconductor of a binding Purchase Order, and quotations may be withdrawn or revised at the sole discretion of ASAP Semiconductor. This quotation is subject to the ASAP Semiconductor Terms & Conditions available at https://www.asapsemi.com/customer-terms-and-conditions/. All United States Government and Department of Defense bids are quoted as CAGE code 6RE77 from ASAP Semiconductor’s Anaheim, California facility. Any quotation from ASAP Semiconductor without 6RE77 is void.

NSN Information for Part Number 301-00H25K with NSN 5905-00-722-3825, 5905007223825

NSNFSCNIINCLSHazmatDEMILCancelled NSN
5905-00-722-3825

Item PartTypeName:

RESISTOR,VARIABLE,WIRE WOUND,NON

59050072238250NB
CIICHCCESDPMICCriticalityENAC
UBU
Part NumberISCRNVCRNCCHCCMSDSSADC
301-61-25K595

Characteristics Data of NSN 5905-00-722-3825, 5905007223825

MRCCriteriaCharacteristic
CRSXACTUATOR TRAVEL CONTROL FEATURESTOPS
ADAQBODY LENGTH0.490 INCHES MINIMUM AND 0.510 INCHES MAXIMUM
CSDHAMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER50.0 SINGLE SECTION
ADAUBODY HEIGHT0.490 INCHES MINIMUM AND 0.510 INCHES MAXIMUM
CRGDPOWER DISSIPATION RATING PER SECTION IN WATTS1.0 FREE AIR SINGLE SECTION
CSDLSTANDARD TAPER CURVE PER SECTIONA SINGLE SECTION
CQGNAMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER150.0 SINGLE SECTION
CQCCELECTRICAL RESISTANCE PER SECTION25.000 KILOHMS SINGLE SECTION
ABHPIII OVERALL LENGTH0.540 INCHES NOMINAL
ABWVSHAFT DIAMETER0.060 INCHES MINIMUM AND 0.064 INCHES MAXIMUM
AXGYMOUNTING METHODTERMINAL
AEDXSHAFT STYLEROUND, SLOTTED
ADATBODY WIDTH0.250 INCHES MINIMUM AND 0.265 INCHES MAXIMUM
ABXFSHAFT LENGTH0.040 INCHES MAXIMUM
ABTBMOUNTING HOLE DIAMETER0.070 INCHES MINIMUM AND 0.076 INCHES MAXIMUM
TTQYTERMINAL TYPE AND QUANTITY3 PIN
APXHTERMINAL LOCATIONLEFT ADJACENT SIDE SINGLE ROW
CQCMCENTER TO CENTER DISTANCE BETWEEN CENTER TERMINAL AND OUTSIDE TERMINAL0.097 INCHES MINIMUM AND 0.103 INCHES MAXIMUM
AEHTCENTER TO CENTER DISTANCE BETWEEN TERMINALS0.200 INCHES NOMINAL
CRSSRESISTANCE TOLERANCE PER SECTION IN PERCENT-5.0 TO 5.0 SINGLE SECTION
AGTPLATERAL DISTANCE BETWEEN MOUNTING HOLE CENTERS0.519 INCHES NOMINAL
AEFDACTUATOR TYPESINGLE SHAFT
AEFHEFFECTIVE ELECTRICAL ROTATION IN DEG ANGULAR ROTATION15876.0 NOMINAL
AEFKMAXIMUM STARTING TORQUE7.50 INCH-OUNCES
ABMKIII OVERALL WIDTH0.274 INCHES NOMINAL
AAPNSECTION QUANTITY1
AAQLBODY STYLERECTANGULAR W/MOUNTING HOLES
AARGRELIABILITY INDICATORNOT ESTABLISHED
ABJTTERMINAL LENGTH0.170 INCHES MINIMUM AND 0.210 INCHES MAXIMUM
ABKWIII OVERALL HEIGHT0.490 INCHES MINIMUM AND 0.510 INCHES MAXIMUM
CQCKROTARY ACTUATOR TRAVEL IN ANGULAR DEG16200.0 NOMINAL

Semiconductor’s Certifications and Memberships



Thank You for Your Visit!

Before You Go, Take a look To Our Extensive Range of NSN Parts Catalog. We Provide High Quality NSN Parts with 24/7 Quotation Facility.

Request for Quote

We use cookies to ensure that we give you the excellent experience on our website. If you continue to use this site we will assume that you are happy with it.

bottom to top