8317-3193-2 by Vamistor Corp with NSN 5905-00-725-7554 - Submit a Quote

Part Number:  8317-3193-2
Alternate P/N:  831731932
Manufacturer:  vamistor corp
CAGE Code:  0EBU2
INC Code:  37406

ASAP Aviation Procurement is pleased to announce that part number 8317-3193-2 of NSN 5905-00-725-7554 is now available and in stock. We can get you one of the fastest and most competitive quotes on this part. Part number 8317-3193-2 is a Resistor Variable Wire Wound Non manufactured by Vamistor Corp under CAGE Code 0EBU2. Simply fill out the Request for Quote (RFQ) form provided here to get started on your quote. In order to make sure that we get you your quote in a timely manner, please take the time to make sure that all fields are completely filled out, particularly the asterisk-marked (*) fields like Parts Needed By and Quantity (ea). 

Note : We Will Not Share Your Information To Any Third Parties.

Please fill out below form for 8317-3193-2

Contact Information

“*” Required Fields Are Compulsory
   * By clicking this box, I acknowledge that I have read and accept the ASAP Semiconductor Terms and Conditions and agree that all quotes and purchase orders are exclusively subject to the ASAP Semiconductor Terms and Conditions.
  • I consent to receive email communications from ASAP Semiconductor and can unsubscribe at any time.
  • ASAP Semiconductor is a wholly independent aftermarket parts distributor.
  • This website is intended for quotations based on part numbers only. Please DO NOT submit drawings, technical data, or other specifications through this portal.
Verify you’re human

Disclaimer: This is a quotation for the goods listed above. This quotation is meant as an estimate and does not reflect a final bill or invoice. All quotations are subject to change until acceptance by ASAP Semiconductor of a binding Purchase Order, and quotations may be withdrawn or revised at the sole discretion of ASAP Semiconductor. This quotation is subject to the ASAP Semiconductor Terms & Conditions available at https://www.asapsemi.com/customer-terms-and-conditions/. All United States Government and Department of Defense bids are quoted as CAGE code 6RE77 from ASAP Semiconductor’s Anaheim, California facility. Any quotation from ASAP Semiconductor without 6RE77 is void.

NSN Information for Part Number 8317-3193-2 with NSN 5905-00-725-7554, 5905007257554

NSNFSCNIINCLSHazmatDEMILCancelled NSN
5905-00-725-7554

Item PartTypeName:

RESISTOR,VARIABLE,WIRE WOUND,NON

59050072575540N
CIICHCCESDPMICCriticalityENAC
UU
Part NumberISCRNVCRNCCHCCMSDSSADC
301-00H50021CA

Characteristics Data of NSN 5905-00-725-7554, 5905007257554

MRCCriteriaCharacteristic
AAQLBODY STYLERECTANGULAR W/MOUNTING HOLES
AARGRELIABILITY INDICATORNOT ESTABLISHED
ABMKOVERALL WIDTH0.443 INCHES NOMINAL
ABTBMOUNTING HOLE DIAMETER0.070 INCHES MINIMUM AND 0.076 INCHES MAXIMUM
AEFHEFFECTIVE ELECTRICAL ROTATION IN DEG ANGULAR ROTATION360.0 NOMINAL
AEHTCENTER TO CENTER DISTANCE BETWEEN TERMINALS0.200 INCHES NOMINAL
AGTPLATERAL DISTANCE BETWEEN MOUNTING HOLE CENTERS0.515 INCHES MINIMUM AND 0.530 INCHES MAXIMUM
AKPVMOUNTING FACILITY QUANTITY2
APXHTERMINAL LOCATIONLEFT ADJACENT SIDE SINGLE ROW
AXGYMOUNTING METHODUNTHREADED HOLE
CQCCELECTRICAL RESISTANCE PER SECTION500.000 OHMS SINGLE SECTION
CQCKROTARY ACTUATOR TRAVEL IN ANGULAR DEG360.0 NOMINAL
CQGNAMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER85.0 SINGLE SECTION
CRGDPOWER DISSIPATION RATING PER SECTION IN WATTS1.0 FREE AIR SINGLE SECTION
CRSSRESISTANCE TOLERANCE PER SECTION IN PERCENT-5.0 TO 5.0 SINGLE SECTION
CSDHAMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER50.0 SINGLE SECTION
TTQYTERMINAL TYPE AND QUANTITY3 PIN
AAPNSECTION QUANTITY1
ABJTTERMINAL LENGTH0.172 INCHES MINIMUM AND 0.203 INCHES MAXIMUM
ABWVSHAFT DIAMETER0.058 INCHES MINIMUM AND 0.062 INCHES MAXIMUM
ABXFSHAFT LENGTH0.030 INCHES MAXIMUM
ADAQBODY LENGTH0.490 INCHES MINIMUM AND 0.510 INCHES MAXIMUM
ADATBODY WIDTH0.250 INCHES MINIMUM AND 0.265 INCHES MAXIMUM
ADAUBODY HEIGHT0.490 INCHES MINIMUM AND 0.510 INCHES MAXIMUM
AEDXSHAFT STYLEROUND,SLOTTED
AEFDACTUATOR TYPESINGLE SHAFT
CQCMCENTER TO CENTER DISTANCE BETWEEN CENTER TERMINAL AND OUTSIDE TERMINAL0.100 INCHES NOMINAL
CRSXACTUATOR TRAVEL CONTROL FEATURECONTINUOUS MOTION
CSCYTEMP COEFFICIENT OF RESISTANCE WIRE PER SECTION IN PPM PER DEG CELSIUS-20.0 TO 20.0 SINGLE SECTION

Semiconductor’s Certifications and Memberships



Thank You for Your Visit!

Before You Go, Take a look To Our Extensive Range of NSN Parts Catalog. We Provide High Quality NSN Parts with 24/7 Quotation Facility.

Request for Quote

We use cookies to ensure that we give you the excellent experience on our website. If you continue to use this site we will assume that you are happy with it.

bottom to top