9-1147-074 by Witco Allied Kelite with NSN 6625-00-291-0900 - Submit a Quote

Part Number:  9-1147-074
Alternate P/N:  91147074
Manufacturer:  witco allied kelite
Item Name :  meter multiple scal
CAGE Code:  89138
INC Code:  62222

ASAP Aviation Procurement is pleased to announce that part number 9-1147-074 of NSN 6625-00-291-0900 is now available and in stock. We can get you one of the fastest and most competitive quotes on this part. Part number 9-1147-074 is a Meter Multiple Scal manufactured by Witco Allied Kelite under CAGE Code 89138. Simply fill out the Request for Quote (RFQ) form provided here to get started on your quote. In order to make sure that we get you your quote in a timely manner, please take the time to make sure that all fields are completely filled out, particularly the asterisk-marked (*) fields like Parts Needed By and Quantity (ea). 

Note : We Will Not Share Your Information To Any Third Parties.

Please fill out below form for 9-1147-074

Contact Information

“*” Required Fields Are Compulsory
   * By clicking this box, I acknowledge that I have read and accept the ASAP Semiconductor Terms and Conditions and agree that all quotes and purchase orders are exclusively subject to the ASAP Semiconductor Terms and Conditions.
  • I consent to receive email communications from ASAP Semiconductor and can unsubscribe at any time.
  • ASAP Semiconductor is a wholly independent aftermarket parts distributor.
  • This website is intended for quotations based on part numbers only. Please DO NOT submit drawings, technical data, or other specifications through this portal.
Verify you’re human

Disclaimer: This is a quotation for the goods listed above. This quotation is meant as an estimate and does not reflect a final bill or invoice. All quotations are subject to change until acceptance by ASAP Semiconductor of a binding Purchase Order, and quotations may be withdrawn or revised at the sole discretion of ASAP Semiconductor. This quotation is subject to the ASAP Semiconductor Terms & Conditions available at https://www.asapsemi.com/customer-terms-and-conditions/. All United States Government and Department of Defense bids are quoted as CAGE code 6RE77 from ASAP Semiconductor’s Anaheim, California facility. Any quotation from ASAP Semiconductor without 6RE77 is void.

Characteristics Data of NSN 6625-00-291-0900, 6625002910900

MRCCriteriaCharacteristic
APPNAccuracy In Percent-2.0 TO 2.0 AT FULL SCALE SINGLE INDICATOR 2ND RANGE
BHMWMeasurement Range-10.0 TO 0.0 DECIBELS ABOVE OR BELOW ONE MILLIWATT SINGLE INDICATOR 1ST RANGE
AMQYInstallation DesignPANEL
APPNAccuracy In Percent-3.0 TO 3.0 AT FULL SCALE SINGLE INDICATOR 4TH RANGE
ASSSPointer ColorBLACK SINGLE INDICATOR ALL RANGES
ABKWOverall Height1.525 INCHES MAXIMUM
SFTTSurface TreatmentENAMEL
SUPPSupplementary FeaturesINTERNAL RES UPPER SCALE 18 OHMS PORM 5 PCT; LOWER SCALE 135 OHMS PORM 5 PCT; RESPONSE TIME 2 SEC
APSYMeter Body Width Behind Mounting Flange3.450 INCHES MAXIMUM
ABMKOverall Width4.234 INCHES MAXIMUM
CTTDCircuit Attachment Method And Quantity2 SOLDER LUG
AXHRMounting Facility Type And Quantity4 UNTHREADED HOLE
FEATSpecial FeaturesRUGGEDIZED AND HORIZONTAL MOUNTING
CBBLFeatures ProvidedKNIFE EDGE POINTER AND MAGNETIC SHIELD AND SELF-ILLUMINATION FACILITY AND ZERO ADJUSTER
CTQLMovement Suspension MethodJEWEL PIVOT BASE
AQECMovement TypeMOVING COIL, PERMANENT MAGNET
AWZJPower SourceEXTERNAL
MATTMaterialALUMINUM
AQFYBackground ColorWHITE SINGLE INDICATOR ALL RANGES
STYLStyle DesignatorRECTANGULAR FLUSH MTG
ABHPOverall Length3.790 INCHES MAXIMUM
BLSBScale Selection MethodTERMINAL
BMNGMeter Body Height Behind Mounting Flange1.525 INCHES MAXIMUM
ABKRCenter To Center Distance Between Mounting Facilities Parallel To Width0.744 INCHES MINIMUM AND 0.756 INCHES MAXIMUM
ANRLMounting Arrangement StyleFOUR HOLE/STUD RECTANGULAR/SQUARE
MRCDecoded RequirementClear Text Reply
ANTGSensitivity Rating1.8 MILLIAMPERES AND 18.5 MILLIAMPERES
BHDCScale Graduation TypeNONLINEAR SINGLE INDICATOR ALL RANGES
APMMDial Scale Marking ColorBLACK SINGLE INDICATOR ALL RANGES
NHCFNuclear Hardness Critical FeatureNONHARDENED
ZZZVFsc Application DataTEST SET,ELECT. EQUIP.
BHMWMeasurement Range+0.0 TO 800.0 KILOWATTS SINGLE INDICATOR 4TH RANGE
BHMWMeasurement Range+0.0 TO 350.0 KILOWATTS SINGLE INDICATOR 3RD RANGE
BHMWMeasurement Range-20.0/-10.0 DECIBELS ABOVE OR BELOW ONE MILLIWATT SINGLE INDICATOR 2ND RANGE
APSTMeter Depth Behind Mounting Flange2.525 INCHES MINIMUM AND 3.603 INCHES MAXIMUM
AACTCircuit Current For Which DesignedDC
AMKDIndicator TypeDIAL W/POINTER
SPCLSpecial Test FeaturesDRAWING IAW MIL-D-1000; SHOCK AND MOSITURE RESISTANT IAW MIL-STD-202; MARK IAW MIL-STD-130
ABKQCenter To Center Distance Between Mounting Facilities Parallel To Length3.799 INCHES MINIMUM AND 3.811 INCHES MAXIMUM
AAPBDielectric Withstanding Voltage In Volts1500
APPNAccuracy In Percent-2.0 TO 2.0 AT FULL SCALE SINGLE INDICATOR 3RD RANGE
ABTBMounting Hole Diameter0.138 INCHES NOMINAL
APPNAccuracy In Percent-3.0 TO 3.0 AT FULL SCALE SINGLE INDICATOR 1ST RANGE
ADZCEnvironmental ProtectionSHOCK RESISTANT AND VIBRATION RESISTANT AND WATERTIGHT

Semiconductor’s Certifications and Memberships



Thank You for Your Visit!

Before You Go, Take a look To Our Extensive Range of NSN Parts Catalog. We Provide High Quality NSN Parts with 24/7 Quotation Facility.

Request for Quote

We use cookies to ensure that we give you the excellent experience on our website. If you continue to use this site we will assume that you are happy with it.

bottom to top